Related Manuals for Solo ST
Summary of Contents for Solo ST
- Page 1 Solo ST Style DIY Electric Guitar Kit Assembly Manual V 2.0 Copyright © 2017 Solo Music Gear. All rights reserved...
- Page 2 Support At Solo Music Gear, its important that we not only provide quality products, but also the best service in the industry. From email support to after sales support we are here to assist our customers at any stage possible.
- Page 3 Thank you for purchasing a Solo DIY guitar kit. We hope that you will find everything either equal to or exceeding your expectations with this Solo DIY Instrument kit. Remember, all the major manufacturing has been professionally completed on this instrument. All the cutting, rounding, routing, binding and sealing has been completed by our factory.
- Page 4 Before you begin to assemble any of the Solo kits, setting out a schedule of how you want to go about each instrument is vital.
- Page 5 Tru-Oil® (known as a “Gun Stock Finish”, based on Linseed Oil) or Waterlox® (Processed Tung Oil) is highly recommended. Oil finishing takes longer, but it is very safe and easy to apply and a high quality finish can be achieved, even by a novice. Copyright © 2017 Solo Music Gear. All rights reserved v2.0...
- Page 6 (the two outer and one center. The alternative way is to put the outer springs on the notches next to the central one – it also improves tuning stability. Copyright © 2017 Solo Music Gear. All rights reserved v2.0...
- Page 7 Wrapping each string around two-three times should be enough. Copyright © 2017 Solo Music Gear. All rights reserved v2.0...
- Page 8 12th fret: .063” – .078” (1.6 - 2mm). For the 6th String (the thickest) – height at the 1st fret: 0.016” – 0.024” (0.4 – 0.6mm); at the 12th fret: .078” – .01” (2 – 2.5mm). Copyright © 2017 Solo Music Gear. All rights reserved v2.0...
- Page 9 It’s not necessary to maintain an even height of the pickup – you may find it more satisfactory sounding by setting it somewhat angled, depending on what you are looking for in the output sound. There are a few Copyright © 2017 Solo Music Gear. All rights reserved v2.0...
- Page 10 2) Apply just a bit of machine oil (3M works best) into the tremolo mounting screws. Apply a bit of machine oil at the string trees to reduce strings friction. Copyright © 2017 Solo Music Gear. All rights reserved v2.0...
Need help?
Do you have a question about the ST and is the answer not in the manual?
Questions and answers