Subscribe to Our Youtube Channel
Related Manuals for CP CPL40
Summary of Contents for CP CPL40
- Page 1 C.P. srl – Via Perotti, 5 – 25125 BRESCIA - ITALY USE AND MAINTENANCE INSTRUCTION MANUAL PLANETARY MIXER CPL40 MECHANICAL SPEED VARIATION Instruction manual CPL-40 1 of 19...
-
Page 2: Table Of Contents
USE AND MAINTENANCE INSTRUCTION MANUAL MECHANICAL SPEED VARIATION PLANETARY MIXER CPL40 This instruction, use and maintenance manual provides the instructions necessary for transportation, starting-up, use and maintenance of the mixer. It must be consulted before any one of these acts. -
Page 3: Safety Instructions
SAFETY INSTRUCTIONS. The safe and systematic use of the mixer is subordinated to compliance with behavior and standards listed hereafter. Safety standards § Personnel must be in good physical and mental conditions and be adequately instructed on the use of the mixer having read this publication. §... -
Page 4: Symbols Used And Qualifications Of The Personnel
Stability for machinery: if there is the possibility of slipping on wet or greasy surfaces or positioning the equipment in Obligation to disconnect unstable places (ships, planes or other), mixer before working on use the appropriate attachments for stable fixing (4 anchoring devices with 200 kg resistance, M8 screws) Obligation to carry out earthling. -
Page 5: Use And Description Of The Mixer
Lack of compliance can cause harm to personnel or damage to the mixer. USE AND DESCRIPTION OF THE MIXER: CPL40 planetary mixers are highly professional machines, capable of excellent performance. Driven by a high-power motor they use a belt speed variator with a high transmission ratio that is capable of a great excursion between low and high speed and a proportional speed of the instrument. -
Page 6: Instructions For Use
SPEED ELECTRICAL CHANGE PANEL BOWL LOCKING HANDLES GRID PROTECTION INSTRUCTIONS FOR USE To be able to work; the bowl must be mounted and the bowl protective grid closed. Otherwise it will be blocked by the safety systems. DO NOT REMOVE OR TAMPER WITH THE ELECTRICAL OR MECHANICAL GUARDS OR SAFETY DEVICES ON THE MACHINE. - Page 7 Best Mix control Panel BOWL STOP DIGITAL LIFT UP BUTTON DISPLAY Figure 1 BUTTON STOP EMERGENCY BUTTON SETTING BOWL LIFT SELECTIONS START BUTTON DOWN BUTTONS BUTTON BUTTON First of all be sure the Emergency stop button is released . The mixer can properly work as Manual or under the Digital timer.
- Page 8 WORKING WITH THE DIGITAL TIMER: If you would like to set the Timer, please press button “MODE” . You should see onto the digital lcd display, the last programmed time as “minutes: seconds” . (figure 3). In case you agree with the timing already set, just press “START” and the mixer will begin to work and the countdown will indicate the resting working time.
-
Page 9: Identification, Position Of The Operator And Dangerous Areas
The mixer is provided with a lever to change the tool rotation speed. This mixer has 7 different speeds. ATTENTION: ALWAYS change the speed while the mixer is moving to allow the variable pulley belt to position correctly. In order to remove the mixture, wait until the tool has stopped. Then turn the protection grid. Use the arrow ê... -
Page 10: Technical Data, Packaging, Dimensions And Weight
There is a plate on the back of the mixer like the one shown which carries indications concerning the manufacturer, the type of machine, serial number, electrical features, frequency, absorbed power and the number of phases and the year of construction. The figure at the side shows the position of the plate, that of the operator respect to the mixer and the AS danger area which must be free from people for a distance A = 250 mm. -
Page 11: Transportation And Handling
TRANSPORTATION AND HANDLING. Machine without pallet. Due to its instability , the mixer must be handled with a suitably-sturdy strap, having it pass below the head, as in the figure at the right. Before lifting, stand the grid up vertically §... -
Page 12: Installation
INSTALLATION The mixer must stand in a vertical position, on a smooth surface sufficiently sturdy for the load (floor with resistance over 20 km/cm2). If in danger of tipping over, anchor the mixer to the floor using 4 plugs or bolts with a traction resistance over kg 300 (M8). Connection to electrical mains The electrical connection must be carried out by a specialized electrician, according to the modalities and standards in force in the country where it is installed. -
Page 13: Cleaning And Maintenance Operations
CLEANING AND MAINTENANCE OPERATIONS. CONTROL OF INSTALLED SAFETY SYSTEMS AND ELECTRICAL SYSTEM The installed safety systems and the electrical system are subject to periodical checks carried out by a specialized electrician. Key of control intervals: Key of how to carry out the controls: (INTERVAL) (METHOD) d = daily. -
Page 14: Extraordinary Maintenance
grease Grease nipples manually Grease manually Should a power cable be damaged, replace it with a H07RN/F cable with a 3x1.5 mm2 section. EXTRAORDINARY MAINTENANCE: Cleaning: the mixer is not jet- To carry out interventions not specially mentioned in the manual, refer proof. -
Page 15: Periodical Maintenance
PERIODICAL MAINTENANCE. DAILY CLEANING AND CONTROL OPERATIONS: • Cleaning outside surfaces of the bowl and tools with cloth and neutral degreasing agent. • Operative and emergency controls check. MONTHLY, ANNUAL MAINTENANCE OPERATIONS Monthly maintenance: • Thorough cleaning of the mixer. •... -
Page 16: Spare Parts List
SPARE PARTS LIST * *: this is a brand new generation of C.P.SRL planetary mixers, the following chart can be little bit different from the machine you have. In case contact the factory to get the updated one. We will soon provide you the real line diagrams of it. - Page 17 194021-1 Long grid wheel pin 194022-1 Grid guide wheel 194023-1 Short grid wheel pin 095020-2 Tool holder shaft CPL-40 095058 Thin wire whisk CPL40 095216 Cast blade CPL40 095217 Cast spiral CPL40 095122-1 Bowl CPL-40 095050-2 Bowl lifting rod CPL-40...
-
Page 18: Blockage Of Machinery And Necessary Remedies
BLOCKAGE OF MACHINERY AND NECESSARY REMEDIES OPERATION POSSIBLE CAUSES REPAIR ANOMALIES Turning the master switch into 1) Plug not inserted correctly or wires 1) Check connection position, the warning light does detached not turn on Pressing the START button, the 1) The slide is not in position or the 1) Lift the slide and reposition it mixer does not start... - Page 19 Obligations of informing users Information model for users of “professional” products INFORMATION FOR USERS In compliance with art. 13 of the Legislative Decree of July 25, 2005, n. 151 “Implementing of Directives 2002/95/EC, 2002/96/EC and 2003/108/EC, relative to the reduction of the use of hazardous substances in electrical and electronic appliances as well as disposal of waste”...
Need help?
Do you have a question about the CPL40 and is the answer not in the manual?
Questions and answers