Flotec FP 7K User Manual
Flotec FP 7K User Manual

Flotec FP 7K User Manual

Vip/fp series
Hide thumbs Also See for FP 7K:

Advertisement

Dear client,
Congratulations on your purchase of this FLOTEC product. Like all FLOTEC products, it has been developed with the
help of the latest technologies and manufactured with the most advanced electrical/electronic parts.
Take the time to read the instructions carefully before using this appliance.
Thank you!
Contents
Ch. 1

Features ..........................................................................................

Ch. 2
Limitations .......................................................................................
Ch. 3
Installation .......................................................................................
Ch. 4
Electric Connection - Start-up .........................................................
Ch. 5
Maintenance and troubleshooting ...................................................
Appendix
Figures ............................................................................................
Warnings for the safety of individuals and objects.
Carefully follow the instructions marked with the following symbols.
DANGER
DANGER
Electric shock
risk
DANGER
WARNING
Ch. 1 Features
WARNING: Read this manual carefully before installing this pump.
This sign warns the operator that the failure to follow an instruction may damage the pump and/or the system.
Carefully store this manual. If problems arise, contact the Customer Assistance Service. Please verify that the pump has
been used correctly and that the cause of the problem is not imputable to its operation.
Every electropump is carefully tested and packed during its assembly.
On receiving the pump, check that the pump has not been damaged during transportation. If the pump is damaged,
immediately inform the dealer within 8 days from the date of purchase.
Ch. 2 Limitations
FLOTEC VIP/FP series electropumps can be used to drain rain water, infiltration water, domestic waste water and to
remove water from flooded rooms in emergency conditions. The pump can be completely or partially submersed and
used to transfer clean or moderately dirty fluids.
WARNING
WARNING
Keep the technical equipment out of the reach of children!
Warns that the failure to follow the directions given may cause electric
shock.
Warns that the failure to follow the directions given could cause serious
risk to individuals or objects.
This sign warns the operator that the failure to follow an instruction may
damage the pump and/or the system.
The pump cannot be used for sea water and inflammable, corrosive, explosive or
dangerous liquids.
Verify that the electropump never runs without liquids.
1
GB
1
GB
1
GB
2
GB
3
GB
4
GB
73
pg.
GB
5

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FP 7K and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Flotec FP 7K

  • Page 1 Dear client, Congratulations on your purchase of this FLOTEC product. Like all FLOTEC products, it has been developed with the help of the latest technologies and manufactured with the most advanced electrical/electronic parts. Take the time to read the instructions carefully before using this appliance.
  • Page 2 Technical Data FP 7K VIP 130/6 Mains voltage / frequency 230 V ~ 50 Hz 230 V ~ 50 Hz Absorbed power 250 Watt 320 Watt IP X8 IP X8 Type of protection / Insulation class Suction fitting 41,90 mm (1"1/4M) 41,90 mm (1"1/4M)
  • Page 3 The automatic FLOTEC VIP/FP model is equipped with a pre-set float switch (See fig.1) please increase or decrease the free piece of float switch cable by making it sliding through the proper seat on the handlebar, when modifyng the rating of float switch.
  • Page 4 Ch. 5 Maintenance and troubleshooting In ordinary conditions, FLOTEC VIP/FP series electropumps do not require any maintenance. It may be necessary to clean the hydraulics or replace the impeller. DANGER Make sure the machine is disconnected from electric power Electric shock supply, before performing maintenance operation.

This manual is also suitable for:

Vip 130/6Vip 180/7

Table of Contents