Page 2
Martini together for your next paddling experience. After some practice it takes literally 10 seconds to assemble your Martini. To take it apart you only need to reverse the process. Please read the warn- ing sticker on your kayak for a safe and fun paddling experience.
Page 3
Place ratchet strap in correct position in buckle Push both parts of the kayak together, so that on both sides of the kayak the ratchet strap is approx 2 cm inside the buckle. Straddle the back part of the kayak and lift, Tighten the buckle, but do not overload buckle, hooking the two parts.
Page 4
Pull the loop end of the rudder lines through After pushing the loop through the hole, fold the holes in the rudder head from above. them back over the end corners. Tighten the loops over the corners by pulling Make sure the line runs along the outside of on the rudder lines.
Page 5
10kg Always use a personal flotation device when Never place heavy objects in the kayak while paddling. Read warning sticker on kayak before carrying or dragging, this can damage the usage. locking system. Never carry or drag the kayak whith someone Never paddle the kayak in surf larger than sitting in the kayak, this can damage the lock- 3 feet in Tandem or 5 feet in Solo, this can lead...
Need help?
Do you have a question about the martini and is the answer not in the manual?
Questions and answers