Handling The Case And Lens Cap - Canon AT-1 Instructions Manual

i d *
PRELIMINARY PREPARATION
Neckstrap and Case
Slide the scratch prevention ring and
spare battery case which houses a spare
battery onto the Canon AT-1's neckstrap,
then thread the neckstrap through the rings.
Adjust the neckstrap to a length m m t suitable
for you.
Firmly attach the case to the camera by
turning the screw on the bottom of the case.
When you wish t o take off the top cover of
the soft case, turn the top cover to the
bottom then slide
it
straight up in the direc-
tion of the arrow and pull it out as indicated
in the photo.