Safe Handling - United Screens Crystal Screens T-OLED User Manual

UNPACKING AND INSTALLING THE CRYSTAL SCREENS T-OLED

SAFE HANDLING

Flight Case
Before opening the CRYSTAL SCREENS Flight Case, it must be brought into an upright position. The castor brakes must be locked
and two persons are needed to set up the flight case. Pay attention to the UP arrows on the flight case, which need to point upwards
once the case stands in upright position.
Unpacking
Open all 4 butterfly closures. A butterfly catch is secured with a combination lock. The corresponding numerical code is located on
the warning sign on the side of the flightcase. Now pull the cover off the flightcase.
When removing the system from its flight case, use the indicated handhold locations shown in the picture below.
We recommend the stele be handled by at least two people. At no time should the IR frame be held where the weight of the stele is
borne by the IR frame. Proper handling is demonstrated in the picture below.
Be certain any surface where the system(s) will be placed can safely support the 165 lbs (75.0 kg) weight of the system. When using
a sack barrow to move the stele, the long transport plate must be installed to prevent damage from the angled stele foot. The stele
must only be moved with a sack barrow from its rear side. To prevent the TOLED panel to be put under strain by the upper part of
the sack barrow, use a hard foam or Styrofoam piece which is wider than the stele struts.
© 2017 united.screens GmbH