Mitsubishi Electric BD-1G User Manual page 18

Battery Replacement
To change the batteries:
1. Loosen the screw to the battery
door on the left side of the
headphones.
2. Slide the battery door open.
3. Replace the two AAA batteries.
4. Replace the battery door and
tighten the screw.
Remove the batteries if the
headphones will not be used for a
long time.
Auxiliary Inputs
Audio/Video (A/V) Jacks
Rear Media Connections (As
Equipped)
1. HDMI
2. USB Port
3. A/V Jacks
4. Wired Headphone Jack
5. Volume Control
If equipped with RSE, an HDMI
(1), a USB port (2), A/V input
jacks (3), wired headphone jack
(4), and a volume control (5) will
be
inside the rear storage area of the
center console.
The A/V jacks allow audio or video
cables to be connected from an
auxiliary device such as a
camcorder or video game system.
The A/V jacks are color coded:
Yellow for video input
.
White for left audio input
.
Red for right audio input
.
Power for the auxiliary devices is
not supplied by the infotainment
system.
To use the auxiliary inputs of the
RSE system:
1. Connect the auxiliary device
cables to the A/V jacks.
2. Power on both the auxiliary
device and the RSE video
screen.
18