Spectrum RAC2V1S User Manual page 39

Chapter 3: USB Sharing
If the printer was previously installed on this PC, then the driver should appear in
the list under the proper manufacturer and printer name.
Check the bottom of the list for your manufacturer. Printers are not always listed
alphabetically.
If your driver does not appear, you will need to locate the correct driver and click
Have Disk to install it.
7. (Optional). You can choose to set this printer as your system Default Printer.
Click Next.
8. If everything is configured correctly, the printer setup Wizard will display the
message, "You have successfully completed the Add Printer Wizard." Click
Finish to complete.
Configuring a Printer for Windows 7
1. Start the Add Printer Wizard:
• Click Start.
• Select Devices and Printer  Add Printer. OR
• Select Control Panel  Devices and Printer  Add Printer.
User Guide Model RAC2V1S
35