1. Manuals
  2. Brands
  3. Tescom Manuals
  4. Personal Care Products
  5. TE210
  6. Manual

Tescom TE210 Manual

Ultrasonic peeling
Hide thumbs

Advertisement

Table of Contents

Ultrasonic Peeling
Names and Functions of the Components
Mist outlet
Head inserting block
Mist button
Mist is emitted while holding down the Mist
button during operation. While mist is being
emitted, the spatula vibration stops.
Head indicator lamp
Indicates the currently inserted head during
operation.
Changeover switch
Changes the peeling strength (HI/LOW).
HI: Blue LOW: Green
Power switch
Pressing and holding down this switch for 1 sec turns on
the power.
Power switch: Red lamp lights up.
Changeover switch: Green lamp lights up.
Head indicator lamp: Green lamp lights up.
* Lights up according to the inserting head status.
Pressing the switch again turns off the power.
Body socket
Household Use Only
TE210
Body
Nickel-Metal Hydride
Battery (built-in)
Battery lamp
[In regular use]
Extinguishes
[Charging in progress]
On: Now charging is in progress.
Off: Charging is complete.
[Low battery]
Flashes for 10 sec and then is
extinguished.
(With warning beep)
1 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TE210 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Tescom TE210

Summary of Contents for Tescom TE210

  • Page 1 Household Use Only TE210 Ultrasonic Peeling Names and Functions of the Components Mist outlet Head inserting block Body Mist button Mist is emitted while holding down the Mist button during operation. While mist is being emitted, the spatula vibration stops.

  • Page 2: Names And Functions Of The Components

    Names and Functions of the Components Water tank cover Water tank cap Water tank Ion-exchanger resin Changes even hard tap water into soft water. ■ Accessories Body cap Subcap Power adapter Attached to keep the body. Attached to keep the FACE or BODY head separate.

  • Page 3: Charging The Battery

    Part name Ultrasonic Peeling Rated time 10 min (automatic turn-off) Part number Charging time Approx. 5 h TE210 Power adapter AC100-240 V 50/60 Hz 140 g (body) Weight 175 g (with body of BODY head) Nickel-Metal Hydride Battery Body (DC3.6V, 800mAh) 1set...

  • Page 4: Precautions For Use

    Precautions for Use CAUTION Avoid using this appliance together with the medical electrical equipment below. Failure to follow these instructions may cause the appliance to malfunction. ● Implanted medical electrical equipment (e.g. cardiac pacemaker) ● Wearable medical electrical equipment (e.g. electrocardiograph) WARNING If you apply to one of the following categories, be This appliance must not be used on any of the...

  • Page 5: How To Use

    How to Use Do not use this appliance for care around the eyes or ears. (Failure to follow these instructions may result in accident or adverse effects.) WARNING If your skin has an injury or wound, the appliance should not be used under any circumstances.
  • Page 6 How to Use Remove the water tank cap. Then, fill the tank with purified or tap water up to the upper limit of the water level. Tighten the water tank cap firmly. Then, wipe droplets off the tank before loading it into the body. With the marks aligned, insert the water tank cap into the water tank.
  • Page 7 How to Use Spray mist onto the desired portion of peeling to moisten the skin. Then, gently place the spatula on the skin and slide it around slowly. Direction of movement Mist Press the Mist Release the Mist button. button. Spray mist onto the skin to moisten it.
  • Page 8 How to Use [Using the FACE Head] ① Install the FACE head on the body. Make sure that when you turn on the Power switch, the head indicator lamp FACE is on. ② By pressing the Mist button, spray mist will moisten your skin.
  • Page 9 How to Use [Using the BODY Head] ① Install the BODY head on the body. When you turn on the Power switch, make sure that the head indicator lamp BODY is on. ② By pressing the Mist button, spray mist will moisten your skin. ●...
  • Page 10 How to Use [Safety device] ● If water enters the head inserting block, the power can no longer be turned on or off owing to action of the safety device. -> To take action for this case, with the head removed from the body, drain off the water from the head and head inserting block, clean them, reinstall the head in the initial position, and press the Power switch to restore to normal operation.

Table of Contents