Table of Contents
Advertisement
In the standby interface, input the call numbers (please add the area
code for domestic long-distance calls), then press Snd key to make the
call.
Calling extension of fixed number
When calling the extension number of a fixed number, you need to dial
the host number and then dial the extension number according to the
corresponding voice hints. If you insert "p" between the host number
and extension number, the mobile phone will automatically dial the
extension number for you.
Making an international call
To make an international call, you simply need to input the symbol "+",
then input the country code and complete phone number that you want
to dial.
Answering a call
2.1.1 Answering new voice call
If there is a new incoming call during a call in progress, the mobile
phone will pop up caller interface (call waiting is activated) and give a
short prompt to tell you that you have a new call. At this time, you can
press Snd key or activate LSK to select Answer incoming to answer
the new call. When you answer a new call, the original call will enter
holding status. At this time, you can activate LSK to select Switch to
the original call, and the new call will enter into holding status.
Note:
When you are in call progress, the new call to another SIM card
can't be dialed in.
2.1.2 Connecting two calls at the same time
When two telephone numbers are connected, activate LSK, and you
can operate as follows:
Switch: switch call.End active End hold End all, SMS, Phone Book,
Mute, Create conference, Enable Bluetooth
End active: hang up the current call.
End all: hang up all the calls.
SMS: edit the SMS and send it.
Phone Book: enter the phone book interface.
Mute: select Mute to turn off the microphone. In this mode, the other
party will not hear you but you can still hear the other party. You can
select Unmute to turn the microphone back on and the other party can
hear you again.
8
Advertisement
Table of Contents
