Table of Contents
Advertisement
1.1.4 Inserting the SIM card
Power off the mobile phone, remove the back cover and battery.
Insert the SIM card correctly in the card slot; finally install the back
cover and battery of the mobile phone.
1.1.5 Unlock the SIM card
In order to prevent illegal use, SIM card adopts PIN code (personal
identification code) encryption protection.
If this function is selected, PIN code should be inputted correctly each
time when you power on the mobile phone, thus to unlock the SIM card
for normal use. Users can disarm the SIM card protection but illegal use
of the SIM card cannot be prevented.
If the PIN code input is incorrect for three consecutive times, your SIM
card will be locked by the network. The mobile phone will enquire the
PUK code which will be provided by your network operator. If the PUK
code input is wrong for 10 times, the SIM card will be permanently
barred.
Note:
Your network operator will set a standard PIN code (4 to 8
numbers) for you and you should change it to private password as
soon as possible.
Plug and unplug the memory card
Power off the mobile phone, remove the rear cover and battery.
The memory card slot at the side of SIM card slot. You should push the
memory card slot according to the indication marked in the slot to open
it, firstly.
Insert the memory card to the slot according to the figure below.
3
Advertisement
Table of Contents
