Download Print this page

Troubleshooting; Technical Information - Zeon DR263 Manual

Smartphone operated dalek

Advertisement

Mode 1 : Remote Control by smartphone
The Dalek should be connected with your Bluetooth® device. Once it is connected, the eye light
will light on and stop ashing. Now you can drive the Dalek via our app.
For more detail of the app operation, please read the "SUPPORT" page within the app.
Mode 2 : Static Speaker
The Gunstick (Blue LED) will ash at 0.5Hz.
The Dalek should be connected with your Bluetooth® device. In this mode, the unit cannot be
controlled by the apps and used as a speaker.
Mode 3 : Autonomous patrol / Movable Speaker
In this MODE, you cannot remote control the Dalek and the Dalek will autonomous patrol on its
own.
If the Dalek is being connected with Bluetooth® device, you can play your music during the
Dalek's patrolling.
How to pair up Bluetooth® device
1. Place the Bluetooth® device within 1 meter and power on the Dalek
2. Red eye light is ashing.
3. Perform the pairing procedure on your smartphone to detect the Dalek.
When the list of detected devices appears on the display of the Bluetooth® device,
select "DALEK".
4. Build "DALEK" Bluetooth® connection from your smartphone. When the connection is made,
the eye (red indicator) lights up.
Under the environment with electrostatic discharge, the product may malfunction. lt requires
user to reset the unit by replacing the batteries.

Technical Information

Bluetooth Speci cation: V2.1 + EDR, Bluetooth Pro le: A2DP
Product Size : 100 mm x 165 mm x 208 mm
Battery : 4 x AA Battery
Trouble Shooting:
Q1
: I cannot control the Dalek?
A1
: Please check that the batteries are inserted in the correct polarity. Replace with new batteries if
necessary.
A2
: The volume of your smartphone may be set too low. Turn up the volume on your smartphone.
A3
: Make sure the Bluetooth on your smartphone is ON and paired up.
A4
: The Dalek should be in Mode 1 for remote control. Please follow Operating Instructions section.
A5
: The Bluetooth® may be disconnected, follow the "How to pair up Bluetooth® device".
A6
: Restart both your smartphone and Dalek and follow the "How to pair up Bluetooth® device".
A7
: Keep the Dalek/device away from a microwave oven, wireless LAN etc.
A8
: Make sure your smartphone and Dalek are within 10 meters of each other and no solid objects
stand in-between.
Page 3

Advertisement

loading