Advertisement
- Exhausted batteries are to be removed from the product;
- The supply terminals are not to be short-circuited;
- Di erent types of batteries or new and used batteries are not to be mixed;
- Only batteries of the same or equivalent type as recommended are to be used.
- For longer battery life, it is recommend to use alkaline batteries.
- If the unit is not to be used for a prolonged period, such as a month of longer, remove the
batteries to prevent possible leakage.
Battery installation:
1. Use a Philips screwdriver to unscrew the battery
compartment cover located on the base of the unit.
2. Insert 4 x 1.5V, AA new batteries, ensuring the
SIZE AA 1.5VX4
correct polarity as indicated on the sketch.
3. Replace the cover and tighten the screws.
Operating Instructions:
Enjoy the Dalek with your Bluetooth® enabled smartphone.
+
1. To work with this product, please download our FREE
application using the Google Play
store app or App Store
+
TM
SM
with searching the keywords "DR263".
SEARCH "DR263"
2. Press and hold the On/O button for 2 seconds.
Once the device is activated, the head will returns to the
middle position and the headlights light on.
Attention: DO NOT rotate the head by hand as it will damage
the mechanism.
1) The device will be in the Mode 1
2) Press once again will enter Mode 2
3) Press once again will enter Mode 3
4) Press once again will go back to Mode 1 and so on.
Press and hold On/O Button for 2 seconds will turn o the Dalek.
DR263 battery
Note : Turn o the unit if not in use.
replacement.
Dalek will move forward, unless it hits a solid object with su cient force to activate the two
sensors on the front end of the base. If the sensors are activated, it will retreat.
Page 2
Advertisement
