Diasonic DMP-200EN User Manual page 15

signal from the external device through line in cable. If the line in cable is not plugged
to the set, the built in microphone is automatically selected on recording, and if the line
in cable is plugged to the set, line in is automatically selected on recording. Recording
starts by pushing REC button in stop position. To stop the recording, push stop button,
then MP3 file is made in audio mode and DMP file in record mode.
※ As though high quality sound recording in audio mode is possible, but uploading the
file through PC connection is prohibited by Copyright.
※ Uploading the file, which is recorded in record mode, through PC connection is legal.
● PC Connection
When you download file by connecting the device to PC through USB cable, LCD
displays "USB Connection "and the device comes into PC connection mode. When
the device is connected to PC, play is not available, so you must detach the PC
connecting cable from the device for play.
Without battery, connection with PC is available by connecting USB jack. When you
plug out USB jack, power is turned off, so turn on power and use the device.
※ Ref.: If pont size on LCD is too big to show properly, set the basic pont size of OS of PC
to 96 DPI or normal size. The pont size shown on the device is depending on the basic pont
size of OS of PC.