Table of Contents
Advertisement
※ Volume can be controlled with the range of 0~30 steps
※ Volume can be controlled when earphone is plugged, and when you plug out earphone,
the device automatically sense "earphone plugged out" and volume is automatically
returned to 20 level.
● Intro play
This function is to check quickly what kinds of songs or voice files are in
memory by playing front portion for just about 10 seconds. If you push
play/pause button
and the front portion of all the tracks is played. If you want to keep the current
track played
intro play mode, undo the intro play by pushing play/pause
in
button.
● Block repeat
The device has the function which makes you set a block and hear it. If you push
SPEED/A↔B button more than 1 second in play mode, A spot, which is the start point
of the block repeat, is set and block repeat icon( A↔B ) starts flashing. And if you
push SPEED/A↔B button when the ending section of block repeat is played, B spot,
which is the end of the block repeat, is set and block repeat icon( A↔B ) is also set
up, then block repeat starts. To undo the block repeat function, push SPEED/A↔B
button again.
● Play speed control
The device has the function which makes you control play speed to normal, fast or
slow.
If you push SPEED/A↔B button on play mode, LCD displays the current mode
( Normal Spd, Fast Spd, Slow Spd ) once and then the set mode is played.
Speed mode being set is not changed unless the mode is changed.
● Record function
Recording in audio mode as well as record mode is available. There are two methods
to record; first is to record with the built in microphone, second is to record the output
play mode for more than 1 second, LCD displays "Intro" icon,
in
Advertisement
Table of Contents
