Table of Contents
Advertisement
AVL GPX-100 User's Manual
Press LearnKey button. The F3 led will static on, which is
waiting for remote control signals.
Press any button of the remote control. If the device
receives the signal, the F3 led will become flashing for few
seconds then turn off.
A successful learning will return the key number of the
remote control, which will be shown on this setup screen.
Note that F3 led will be returned to off state either after a
successfully learn a remote control or 15 second learning interval
is passed.
1.1.3.7.
Save and Download Configuration
After making any changes on the device, click on the Save button,
data will be saved to local database; click on the UpdateDevice
button, data will be saved to the local database and downloaded to
the device.
3G Quest Technologies, Inc.
11
Advertisement
Table of Contents
