AVL GPX-100 User’s Manual 1. Installation 1.1. Software Installation and Configuration 1.1.1. System Requirement The minimum requirement to install the configuration application is 1. Operating System: Windows NT/2000/XP 2. Free Disk space: 5 Mbytes 3. One CD-ROM device 4. One DB-9 serial port connector 1.1.2.
Page 4
AVL GPX-100 User’s Manual Figure 1: Home Tree 4. Expend the Home tree, an AVLDevice tree will be shown as Figure Figure 2: AVLDevice Tree 5. Expend the AVLDevice tree, there is a default device, MyDefaultDevice, has been created. (Figure 3)
AVL GPX-100 User’s Manual Figure 3: Default Device 6. Double click on the ‘MyDefaultDevice’ device. You should be in the device configuration. (Figure 4) Figure4: Device Configuration 1.1.3.1. Setup general information (General Tab) From this interface, you can modify the device name, update device serial number (10 characters string from the back of the device), and device pin number.
Page 6
AVL GPX-100 User’s Manual The device is able to store 4 pre-set phone numbers for speed dial phone call. From this interface (Figure 5), you can setup the phone numbers to be your phone call recipients. Figure 5: Call Recipient Setup The device panel has 6 keys (Figure 6).
AVL GPX-100 User’s Manual To call 3 recipient, press F2/1 key, then press Call key and wait for 3 second, the call will be made. To call 4 recipient, press F3/9 key, then press Call key and wait for 3 second, the call will be made.
Page 8
AVL GPX-100 User’s Manual Figure 8: Text Message recipient To send current vehicle location to 1 recipient, press Trace key and wait 3 second, the call will be made. This recipient is also the default recipient of system notifications ( Setup 2.1.3.5...
AVL GPX-100 User’s Manual executed, press Clear/Hangup key will stop making the message call. The Auto Trace Rate is the time interval of sending vehicle location, when the Auto Trace mode is ON. 1.1.3.4. Setup input and output points (I/O Channel Tab) The device is able to connect 4 inputs and 4 outputs (Figure 9).
AVL GPX-100 User’s Manual interface (Figure 11), you can setup event text message and enable/disable individual event and alarm. Figure 11: Event/Alarm setup 1.1.3.6. Setup remote controls (Keys Tab) Every AVLDevice can learn up to 4 remote controls. From this...
AVL GPX-100 User’s Manual Press LearnKey button. The F3 led will static on, which is waiting for remote control signals. Press any button of the remote control. If the device receives the signal, the F3 led will become flashing for few seconds then turn off.
AVL GPX-100 User’s Manual 1.2. Hardware installation Warning: In order to guarantee the device’s proper functions and the vehicle’s safety, a certified technician is required to install the device to the vehicle. 1.2.1. Power Source The power source can be either from the vehicle battery or from the cigarette lighter.
AVL GPX-100 User’s Manual 2. Operation The keys on the device should match those on the remote controls. For the simplicity, the key will be meant either remote control key or device panel key. 2.1. Making a call To make a phone call to a preset recipient, please reference to 2.1.3.2 Setup...
AVL GPX-100 User’s Manual The device can output GPS data thru the RS232 port. Any notebook, PC, or palm device with a map application, as long as the map application is able to interpret the GPS data, the whole system becomes a real-time navigation system.
User Manual occur, don’t handle them by yourself but contact us or the local agent immediately. 3G Quest shall not be held responsible for the loss due to user’s improper operations. The product’s specifications are subject to change without notice.
AVL GPX-100 User’s Manual This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 5. Appendix 5.1. Parts List This package includes the following items: GPX-100 device 12VDC power adapter GPS antenna GSM antenna...