Aura ® Location-Based Alerts; Downloading The App; Cobra Iradar ® App - Cobra iRAD Operating Instructions Manual

Detection
Your Detector
Intro Operation Customer Warranty
AURA ® Location-based Alerts (LBAs)
Assistance
and iRadar Community
Your detector is capable of providing you with LBAs and iRadar Community threat
sharing data when connected to iPhone or Android phones. The detector uses the
GPS in your smartphone to connect to and obtain the latest LBA's and alert you to
Secondary Icons
them. Vehicle speed and compass headings use your phone's GPS as well. See
the section on Downloading the App to add these features and more.

Downloading the App

Notice
For optimal performance and access to all this detectors advanced features, you
should download the iRadar app and use it when you drive with this detector. To
download the app you must enter the iTunes Store or Google Play and search for
"Cobra iRadar". Follow the onscreen instructions to download and install the
Cobra iRadar app.
Cobra iRadar App
®
The iRadar app separates Cobra from any other detectors out there.
Make sure to check out the Tutorial for a full explanation of app features. The
Tutorial can be accessed from the Menu.
Information on specific settings and explanations of radar bands can be found by
pressing the green info icons in the settings menus. The iradar app can also be
used to change and easily adjust the detectors settings!
12 English
Your Detector
Intro Operation
Pairing/Connecting With Your Detector
GPS and iRadar-based features require connection to a Bluetooth
•
ready device and the Cobra iRadar app.
Secondary Icons
Please note, this is the newer Bluetooth
always done in the same manner and menus as conventional Bluetooth. This
detector will NOT APPEAR in the Bluetooth Settings menu of your iPhone
For iPhone ® 5s and later with Bluetooth
a. Power on the detector. If not connected, it will be in the
•
Notice
Pairing Mode automatically.
b. Make sure your iPhone Bluetooth is turned On.
c. Start the Cobra iRadar application. Press the Menu icon in the upper left
corner of the app and select Devices. Follow the onscreen instructions to
complete the pairing and connection.
d. When complete, you will see "iRAD Connected" appear on the detector screen.
e. Enter the app to complete the connection.
•
For Android ™ :
a. Power on the detector. If not connected, it will be in the
Pairing Mode automatically.
b. Make sure the your Android
Bluetooth Settings Menu. For most devices this can be found by pressing;
Settings > Bluetooth .
c. Press Scan for Devices and/or wait for the device list to populate and then
select iRadar. Pairing can take up to 30 seconds.
d. The phone might show "Paired but not connected" in this menu. That's OK
as the connection will be completed after opening the iRadar App.
For more information on pairing with Bluetooth devices consult your phone's
owners manual.
If you are having trouble initializing or maintaining your
Bluetooth connection completely turn off your smartphone and detector device,
wait 30 seconds, and then turn them back on.
Detection
Customer Warranty
Assistance
Smart technology and pairing is not
®
® Smart:
device's Bluetooth is turned On and go to the
™
•
Smart
®
.
®
Nothing Comes Close to a Cobra 13
®