Related Manuals for Systec & Solutions PILOT 219
Summary of Contents for Systec & Solutions PILOT 219
- Page 1 INSTRUCTIONS FOR USE INDUSTRIAL PC PILOT 219 PC Read the instructions prior to performing any task!
- Page 2 Systec & Solutions GmbH Emmy-Noether-Straße 17 D–76131 Karlsruhe Telephone: 0721 6644 400 Fax: 0721 6644 444 email: talk@systec-solutions.com Internet: www.systec-solutions.com © 2017 PILOT, 1, en_US, 03.08.2017 PILOT 219 PC - Industrial PC...
-
Page 3: Table Of Contents
5.7 Hard disk LED (optional)..............32 Repairs......................33 Storage......................35 7.1 Unmounting the device..............35 7.2 Storing the device................37 Packaging and transport..............39 8.1 Packaging the device............... 39 8.2 Transporting the device..............39 Disposal......................41 Site information..................43 PILOT 219 PC - Industrial PC... - Page 4 Table of contents PILOT 219 PC - Industrial PC...
-
Page 5: General Information
Any violation of this requirement will render you liable for damages. The right to make further claims is reserved. PILOT 219 PC - Industrial PC... - Page 6 General information Copyright notice PILOT 219 PC - Industrial PC...
-
Page 7: Safety
Safety notices Safety 2.1 Designated use PILOT 219 PC is an HMI system. PILOT 219 PC is used to implement con- trol and operating concepts and to display and manipulate information in industrial and commercial environments. It is nonetheless possible for improper use to introduce hazards. For correct operation and safe use it is therefore important to comply with the information and instructions in this document. -
Page 8: Important Safety Notes
– Before connecting up the device always disconnect the line from the power supply. – Before connecting up always check that the lines are at zero voltage. PILOT 219 PC - Industrial PC... - Page 9 Only bend the cables with a minimum bending radius of 9.1 cm. In order to ensure proper use of the keyboard, the USB port of the keyboards should not exceed a maximum cable length of 3 meters. Other lengths on request. PILOT 219 PC - Industrial PC...
- Page 10 Safety Important safety notes PILOT 219 PC - Industrial PC...
-
Page 11: Product Description
Capacitive On/Off button Switches the device on and off. Function keys Custom keyboard shortcuts (Ctrl + Alt + Del, for example). Hard disk LED (optional) Flashes when accessing data on the internal HDD disk. RFID (optional) Used for user identification. PILOT 219 PC - Industrial PC... - Page 12 The button on the back of the monitor is used to switch the PC ON and OFF. Multimedia kit (optional) Fig. 3: PILOT 219 PC Designation Description Camera Used to record images. Microphone Used to record sound. PILOT 219 PC - Industrial PC...
-
Page 13: Type Plate
Description Product name Serial number Power supply and consumption, charge current and battery capacity (only for devices with an inte- grated battery) CE/FCC mark Manufacturer’s logo QR code (S/N + product name) Manufacturer’s address PILOT 219 PC - Industrial PC... -
Page 14: Technical Data For The Device
376.32 x 301.06 mm Native (maximum) resolution 1280 x 1024 (SXGA) Page ratio Colors 16.7 million Contrast 2000:1 Touchscreen (optional) mouse compatible, analog resistive or PCT (projected capacitive) multi- touch, optical bonding with laminated polyester layer PILOT 219 PC - Industrial PC... - Page 15 -20 °C ‒ +60 °C Operation 0 °C ‒ +40 °C (55 °C optional) Humidity 10 % ‒ 90 %; non condensing Dimensions (in mm without key- board hinge) Width Height Depth Weight Net weight ca. 10 kg PILOT 219 PC - Industrial PC...
-
Page 16: Dimensions
Product description Dimensions 3.4 Dimensions Fig. 6: Dimensions of front of device Fig. 7: Dimensions of back of device PILOT 219 PC - Industrial PC... -
Page 17: External Connections
3.5 External connections 3.5.1 Overview of external connections The following illustration shows the connectors that are located on the back of the PILOT 219 PC. Fig. 9: Overview of the interfaces on the back (depending on the configura- tion) PILOT 219 PC - Industrial PC... -
Page 18: Description Of The External Connections
HDMI port = 19-pole HDMI socket for connecting to the basic computer Fig. 12: HDMI socket with pinout VGA port = 15-pole HD-D "VGA" socket for connecting basic computer Fig. 13: VGA socket with pinout PILOT 219 PC - Industrial PC... - Page 19 = 9-pole USB 3.0 socket for connecting components: VoIP hardware components and/or touchscreen and/or keyboard Fig. 16: USB 3.0 socket with pinout Ethernet (RJ45) = 8-pole Ethernet socket for connecting to a network Fig. 17: Ethernet socket with pinout PILOT 219 PC - Industrial PC...
- Page 20 (100 – 240 V AC, 50 – 60 Hz) GF-7,62. The corresponding plug carries the designation Phoenix Con- tact PC 4/ 3-ST-7,62. Fig. 19: 3-pole Phoenix Contact socket for the power supply Designation Significance Surge protectors Phase Neutral conductor PILOT 219 PC - Industrial PC...
-
Page 21: Conformity
Systec & Solutions GmbH Emmy-Noether-Straße 17 D–76131 Karlsruhe Germany Phone +49 721 6634 400 Fax +49 721 6634 444 talk@systec-solutions.com www.systec-solutions.com Karlsruhe, January 1, 2017 Philipp Linder Managing Director (CTO) PILOT 219 PC - Industrial PC... - Page 22 Product description Conformity PILOT 219 PC - Industrial PC...
-
Page 23: Starting Up
Make sure the ambient temperature does not exceed the specified maximum value (see Ä Chapter 3.3 “Technical data for the device” on page 14). When installing the equipment also observe Ä Chapter 3.4 “Dimen- sions” on page 16. PILOT 219 PC - Industrial PC... -
Page 24: Mounting The Device
Working on heavy equipment may lead to serious injuries. – Always have two people when working with heavy equipment. Hold the PILOT 219 PC firmly so that it is level with the equip- ment rack adapter. PILOT 219 PC - Industrial PC... - Page 25 Ä Chapter 3.5 “External connections” on page 17 – and the requirement for the electrical supply lead Ä Chapter 3.3 “Technical data for the device” on page 14. PILOT 219 PC - Industrial PC...
- Page 26 Starting up Mounting the device Fig. 20: Interface plate on the rear of the PILOT 219 PC (depending on the configuration) Connect up all the cables between the interface plate and the equipment rack adapter. Tighten the screws on the mains plug.
-
Page 27: Operation
Switching the device off Operation 5.1 Switching the device on Fig. 22: ON/OFF button for switching on and off Press the ON/OFF on the right-hand front side of the PILOT 219 ð The system goes into operation. 5.2 Switching the device off NOTICE! Loss of data due to failure to save it. -
Page 28: Operating The Touchscreen
5.4 Cleaning the device To prevent malfunctions or incorrect data entry due to inadvertent operations: Switch the device off before cleaning it (see Ä Chapter 5.2 “Switching the device off” on page 27). PILOT 219 PC - Industrial PC... - Page 29 Do not use any abrasives or hard materials. – Clean the display without applying any excessive pres- sure. Regularly clean the surface of the device using a soft, moist, lint- free cloth. For more significant soiling: Use isopropanol as cleaning agent. PILOT 219 PC - Industrial PC...
- Page 30 Potash soap Trichloroacetic acid <10% Butyl cellosolve Potassium hydroxide Tricresyl phosphate <30% Sodachlorine <20% Kerosene Thinner (white spirit) Cyclohexanol Cresol phenol soaps Soaps, dishwasher in solution and detergent solu- tions Decon Methanol Water <100°C PILOT 219 PC - Industrial PC...
- Page 31 Systec & Solutions GmbH Emmy-Noether-Straße 17 | 76131 Karlsruhe | Germany Phone +49 721 6634 400 | Fax +49 721 6634 444 talk@systec-solutions.com | www.systec-solutions.com PILOT 219 PC - Industrial PC...
-
Page 32: Using The Optional Usb Connection
Install the WLAN driver from the supplied USB stick. ð The WLAN is set up. 5.7 Hard disk LED (optional) The hard disk LED flashes when the internal HDD hard disk is accessed. This is, however, possible only for HDD disks. PILOT 219 PC - Industrial PC... -
Page 33: Repairs
If you encounter a product fault while using the device: – immediately switch it off (see Ä Chapter 5.2 “Switching the device off” on page 27). The device is defective. Send an e-mail to support@systec-solutions.com or Fill out a support form at https://www.systec-solutions.com/en/support/. PILOT 219 PC - Industrial PC... - Page 34 Repairs PILOT 219 PC - Industrial PC...
-
Page 35: Storage
Before you carry out any work on a device: Disconnect it from the power supply. You will need the following tools: Allan key (4) for M5 x 16 Philips screwdriver for the plug Slot screwdriver PILOT 219 PC - Industrial PC... - Page 36 Lift the device off the equipment rack adapter and hold it firmly. ð You can now see the interface plate on the rear of the device. Fig. 24: Interface plate on the rear of the PILOT 219 PC (depending on the configuration) Release the screws on the mains plug.
-
Page 37: Storing The Device
Always shield the equipment from solar radiation. Avoid mechanical vibration and shocks. Avoid cold weather and extreme temperature fluctuations. Pay attention to the information in the “Technical data” section. Ä Chapter 3.3 “Technical data for the device” on page 14 PILOT 219 PC - Industrial PC... - Page 38 Storage Storing the device PILOT 219 PC - Industrial PC...
-
Page 39: Packaging And Transport
Avoid extreme temperature fluctuations. Pay attention to the information in the “Technical data” section. When the consignment is delivered, immediately check it for possible transport damage and deal appropriately with any detected transport damage or non-obvious defects. PILOT 219 PC - Industrial PC... - Page 40 Packaging and transport Transporting the device PILOT 219 PC - Industrial PC...
-
Page 41: Disposal
Systec-Services GmbH for proper dis- posal. Do not dispose of the equipment via your local municipal col- lection centers. Under the WEEE Directive these may be used only for privately used equipment. PILOT 219 PC - Industrial PC... - Page 42 Disposal PILOT 219 PC - Industrial PC...
-
Page 43: Site Information
VAT ID no. as per §27a Value Added Tax Act: DE 815434969 © Systec & Solutions GmbH / All rights reserved Technical modifications reserved All trademarks and registered trademarks mentioned are the property of their respective owners PILOT 219 PC - Industrial PC...
Need help?
Do you have a question about the PILOT 219 and is the answer not in the manual?
Questions and answers