Table of Contents
Advertisement
Variable partition net
Insert adapters into the required
position in the rails. Stick together the
halves of the net rods.
To install, push rods together a little
and insert into the relevant openings
in the adapters.
To remove, press the net rods
together and remove from the
adapters.
Net pocket
Insert adapters into the required
position in the rails. The net pocket
can be suspended from the adapters.
Storage
Installation of hooks in the rails
Insert the hook in the desired position
first in the upper groove of the rail and
then press in the lower groove. To
remove, first pull out of the upper
groove.
89
Advertisement
Chapters
Table of Contents
