Table of Contents
Advertisement
Setting up the seats
● Fold in interior protection mat
3 83 and remove load
compartment cover 3 81.
● Insert the latch plate of the seat
belt on each side into the pocket
that is mounted at the belt.
● Pull up the seat by the upper
loop, fold out and allow seat to
engage in upright position.
Folding down the seats in the
vehicle floor
● Push down head restraint by
pressing the catch 3 36.
● Insert the latch plate of the seat
belt on each side into the pocket
that is mounted at the belt.
Seats, restraints
● Pull the lower loop,
simultaneously swing the
backrest forwards until the seat is
lowered into the vehicle floor.
● Install the interior protection mat
3 83 and load compartment
cover 3 81.
49
Advertisement
Chapters
Table of Contents
