Dvi-d over one cat6 transmitter & receiver (12 pages)
Summary of Contents for Cypress WiFi3309701
Page 1
Part Number: WiFi3309701 Ultra Low-Power 802.11b Transceiver Module OEM User Manual FCC ID: W3I-WIFI3309701 IC: 8266A-WIFI3309701 Revision 02 March 12, 2009...
Page 2
‘Cypress’ product in mission or safety critical system applications implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges. In no event is Cypress liable to anyone for any indirect, special or consequential damages.
90mA External PA = 20dBm** 152mA 200mA Program Flash 3.2mA Notes: * Accounts for 1.8V I =20uA typ and 3.3V I =20uA typ. ** Accounts for 90% switching efficiency of the 1.8V switcher. Cypress Envirosystems OEM User Manual Page 3...
ADC Parameters Parameters Min. Typical Max. Units Notes ADC Resolution bits ADC Sample Freq ADC Offset Error ADC Gain Error Supply Current 1.8V supply Input Resistance MOhm Bandgap (V 1.159 1.22 1.281 Notes: Cypress Envirosystems OEM User Manual Page 4...
Page 5
Rev02 User Guide Information Electronic device manufacturers using Cypress Envirosystems modular approval are required to place the below text in their product user’s guide in accompaniment with other regulatory information. The text may be disbursed according to language or geographic regions if desired, but the exact text shown below must be maintained.
Page 6
This modular approval is granted provided Digital Electronic Devices manufacturers assume responsibility for ensuring that other transmitters operating in conjunction with the WiFi3309701 comply with RF exposure requirements associated with their use. The use of one or more additional RF transmitters will require review by the FCC and may require end-product recertification, including the WiFi3309701 to ensure emissions compliance and RF safety.
Page 7
Product Labeling Requirements FCC product labeling requirements stipulate an FCC label, including specific text, be placed on the device containing the WiFi3309701 module. The product label must include the following text and must be affixed to the exterior of the OEM’s product.
Rev02 DECLARATION OF CONFORMITY Cypress Envirosystems 198 Champion Court San Jose, CA 95134 declare under our sole responsibility that the product(s) WiFi3309701 to which this declaration relate(s) is in conformance with the following standards: ETSI EN 300 328-2: 2001-12 (Article 3.2 of R&TTE Directive) ETSI EN 301 489-1 (2000-08) ETSI EN 301 489-17 (Article3.1(b) of R&TTE Directive)
Need help?
Do you have a question about the WiFi3309701 and is the answer not in the manual?
Questions and answers