Stages Cycling™ LLC www.stagescycling.com Info@stagescycling.com 1-800-778-7218 Offices: Sales, Accounting and Administrative: 1732 NW Quimby, Ste 250, Portland, OR 97209 Design, Manufacturing and Tech. Support: 3090 Sterling Cir, Ste 102, Boulder, CO 80301 Specifications This product is ANT+ cer d and complies with the fol l owing spe...
Page 3
Training with a power meter is the best way to guarantee improvements in your functional threshold power, overall fitness and of course speed. We all want to ride faster with less effort and using a power meter will help you to determine your strengths and weaknesses, create the proper training zones and easily understand your progress.
Water resistance notice The Stages™ power meter is designed to provide excellent water resistance and tested to resist water ingress to the IPX8 standard (2 meters depth for 30min). This provides outstanding water resistance for cycling conditions on-road and off, including stream crossing and heavy rain.
Page 7
4. If there is interference between the power meter and the frame or other components, contact your retailer for technical assistance. Contact Stages Cycling If the power was purchased from our on-line store. 5. If no interference is found you may continue with the final installation of pedals according to the pedal manufacturer’s instructions.
Page 8
Pairing the power meter The power meter must be connected or “paired” to the cycle computer or mobile device (collectively referred to as display units) according to the display manufacturer’s instructions. Each power meter has a unique ANT+ device ID and a unique Bluetooth ID.
Page 9
Zero offset The zero offset is an important feature of the power meter that resets the zero offset value for the power meter sensors. There are physical and environmental conditions that may affect the zero offset value and there are methods both manual and automatic that will adjust this value to accommodate for the changing physical and environmental condition.
Please note that not all display units will display the error code message. Code #s Corrective Action Simply attempt zero reset again. If code remains after several attempts please contact 1,2,4,16 Stages Cycling – Technical Support. Power meter crank not in proper position (straight down) see FIG 8.
Page 11
Code #s Corrective Action Simply attempt zero reset again. If code remains after several attempts please contact 1,2,4,16 Stages Cycling – Technical Support. Power meter crank not in proper position (straight down) see FIG 8.
Page 12
(OTA) firmware updates. Updated firmware may be developed and released by Stages Cycling to provide added or improved functionality. Firmware updates may be sent to the power meter by way of the Stages Cycling Utility App for Apple® iOS devices using a Bluetooth Smart compatible (BLE 4.0) model such as the iPhone® 4s, 5 or newer and iPad® 3, Mini or newer.
Troubleshooting If no power (watts) or cadence (RPM) signal is being received by your compatible display unit when ridding the bike, please confirm the following items: 1. Confirm that a fully charged CR2032 battery is properly installed in the power meter according to the reference FIGs 1-5 of this manual.
The Stages Power™ device may be protected by USA or foreign patents or patents pending. This document may contain trademarks or registered trademarks of Stages Cycling LLC as represented by the use of ™ and ® respectively.
Need help?
Do you have a question about the StagesPower and is the answer not in the manual?
Questions and answers