Advertisement
Frequency, Gain and Power Specifications
Band
Operating Channel
Frequency Band
Cellular
869 – 894 MHz
Downlink
Cellular Uplink
824 – 849 MHz
PCS Downlink
1930 – 1990 MHz
PCS Uplink
1850 – 1910 MHz
The Manufacturer's rated output power of this equipment is for single carrier operation. For
situations when multiple carrier signals are present, the rating would have to be reduced by 3.5
dB, especially where the output signal is re-radiated and can cause interference to adjacent band
users. This power reduction is to be by means of input power or gain reduction and not by an
attenuator at the output of the device.
The 5BARz™ Road Warrior has internal gain control that ensures that the output power will not
exceed the requirements as specified in the paragraph above.
Antenna Requirements
This device has been designed to operate with the antennas listed below, and having a maximum
gain as shown in the chart below specifying maximum allowed antenna gains. Antennas not
included in this list or having a gain greater than the listed gains are strictly prohibited for use
with this device. The required antenna impedance is 50 Ohms.
Optional Antennas List
Cellynx Model MA017
Cellynx Model MA018
NOTE: Please go to Cellynx.com for antenna details
Nominal Max
Nominal
Operational
Bandwidth
Gain
45 dB
38 MHz
42 dB
42 MHz
45 dB
77 MHz
42 dB
82 MHz
6
Rated Mean
Output Power
80 mW
125 mW
70 mW
85 mW
Advertisement
