Mini COUNTRYMAN Owner's Manual page 161

Adjusting distance
Safety information
WARNING
The system does not relieve from per‐
sonal responsibility. Due to the system limits,
braking can be late. There is a risk of accidents
or risk of damage to property. Be aware to the
traffic situation at all times. Adjust the distance
to the traffic and weather conditions and main‐
tain the prescribed safety distance, possibly by
braking.◀
Reduce distance
Press button repeatedly until the de‐
sired distance is set.
The set distance is briefly displayed in
the left part of the instrument cluster.
Increase distance
Press button repeatedly until the de‐
sired distance is set.
The set distance is briefly displayed in
the left part of the instrument cluster.
Continuing cruise control
General information
An interrupted cruise control can be continued
by calling up the stored speed.
Make sure that the difference between current
speed and stored speed is not too large before
calling up the stored speed. Otherwise, unin‐
tentional braking or accelerating may occur.
In the following cases, the stored speed value is
deleted and cannot be called up again:
▷ When the system is switched off.
▷ When the ignition is switched off.
Online Edition for Part no. 01402983567 - X/17
Driving comfort
Calling up stored speed and distance
Press button with the system inter‐
rupted. Cruise control is continued with
the stored values. The selected distance is
briefly displayed in the Info Display.
Switching distance control on/off
Safety information
WARNING
The system does not react to traffic driv‐
ing ahead of you, but instead maintains the
stored speed. There is a risk of accidents or risk
of damage to property. Adjust the desired
speed to the traffic conditions and brake as
needed.◀
Switching distance control off
Press and hold this button.
Or:
Press and hold this button.
The indicator light in the instrument
cluster lights up.
To switch distance control back on, press one of
the two buttons again briefly.
After changing over distance control, a Check
Control message is displayed.
Displays in the instrument cluster
Desired speed and stored speed
In addition to the indicator light, the de‐
sired speed is displayed in the Info Dis‐
play.
▷ Display lights up green: system is active, the
display indicates the desired speed.
CONTROLS
161