Mini COOPER Owner's Manual page 78

Hide thumbs Also See for COOPER:
Table of Contents

Advertisement

CONTROLS
2.
Press and hold the wiper level down, until
the wipers stop in a close to vertical posi‐
tion.
3.
Fold the wipers all the way away from the
windshield.
Folding down the wipers
After the wipers are folded back down, the
wiper system must be reactivated.
1.
Fold the wipers back down onto the wind‐
shield.
2.
Switch on the ignition.
3.
Push wiper lever down. Wipers return to
their resting position and are ready again
for operation.
Canada: wiper system
General information
Do not use the wipers if the windshield is dry,
as this may damage the wiper blades or cause
them to become worn more quickly.
78
Driving
Online Edition for Part no. 01402983336 - X/17
Safety information
WARNING
If the wipers start moving in the folded
away state, body parts can be jammed or dam‐
age may occur to parts of the vehicle. There is a
risk of injury or risk of damage to property.
Make sure that the vehicle is switched off when
the wipers are in the folded away state and the
wipers are folded in when switching
NOTE
If the wipers are frozen to the windshield,
the wiper blades can be torn off and the wiper
motor can overheat when switching on. There
is a risk of damage to property. Defrost the
windshield prior to switching the wipers
Switching on
Tap up the lever or press it past the resistance
point.
Normal wiper speed: tap up once.
Fast wiper speed: tap up twice or tap once
beyond the resistance point.
The lever automatically returns to its initial po‐
sition when released.
on.◀
on.◀

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

John cooper worksCooper s

Table of Contents