Table of Contents
Advertisement
•
The folder "100_TSB" is pre-written on the Product and the JPEG file "FA000001.JPG" is pre-written in the folder. When the
Product is used in a digital camera, the below image will be displayed. This folder and the file are necessary for the
operation of the FlashAir configuration software. Do not delete the folder and file, or you will be unable to change the
automatic-manual operation for wireless LAN functionality.
The detail information how to use this image is available on on-line help of FlashAir configuration software.
If you delete them, you can reset the Product to factory defaults using the "Initialize Card" menu of FlashAir configuration
software.
The "Initialize Card" feature may cause all the data and initial settings stored in the Product to be lost. Back up your data on
multiple types of storage media before using this feature.
•
The Product is compliant with local radio regulations in following countries or regions. (as of February 2012)
Japan, North America, Canada, EU (European Union)
Use in other countries and regions may violate local ordinances.
You can check the latest information at online manual (http://www/toshiba.co.jp/p-media/flashair/manual.htm) or contact
your Customer Service.
•
Default settings
SSID
Security
Encryption and authentification
IP Address
Wireless LAN functional specifications
Wireless LAN Standard: IEEE802.11b/g/n
Modulation: DSSS/CCK (1, 2, 5.5, 11 Mbps), OFDM (6 to 150Mbps)
Wireless LAN Security: WEP, TKIP, AES (WPA/WPA2)
Copyright© 2016-2017 TOSHIBA Corporation – Storage & Electronic Devices Solutions Company
flashair_xxxxxxxxxxxx ( x represents MAC address of the Product)
WPA2 security key: 12345678
WPA2-AES (access point mode)
192.168.0.1 (access point mode)
12/12
Hide quick links:
Advertisement
Table of Contents
