2. When two devices are connected on the network ports, the
two speed LEDs blink simultaneously to indicate the negotia-
tion of the highest mutual Speed. When the connection is
establish, the Speed LEDs indicates the network speed:
the left LED light for a 10Mb connection.
the right LED light for a 100Mb connection.
both LEDs light for a 1Gb connection.
If no mutual speed is detected, the two LEDs blink alternative-
ly.
* Network activity is shown on the Activity LEDs of Network A
and Network B.
3. Connect the two Monitor Ports to the analyzer using
straight or cross-over CAT5e cables.
The Monitor Ports are at the speed of the network ports.
The Monitor Ports Link LEDs light when link is found.
* Activity received into NetworkA and NetworkB will be mir-
rored on the respective Monitor Ports and blink the ACTIVITY
LEDs.
The maximum distance between any of the connected
devices is 100 m.
www.profitap.com
Page 10