Table of Contents
Advertisement
R240D
Hardware Installation and Maintenance Guide
2.5.3 Installing the Device on a Wall or Ceiling
Installing the Device on a wall or ceiling requires sheet metal mounting brackets (delivered
with screws), which need to be purchased separately. The procedure is as follows:
1.
2.
3.
Issue 03 (2016-01-26)
Determine the target area on a wall or ceiling, attach the sheet metal mounting bracket
against the wall, and mark positions of the mounting holes with a marker.
Drill holes at the marked positions and install the plastic expansion tubes.
a.
Use a 6 mm drill bit to drill holes at the marked positions.
b.
Hammer the plastic expansion tubes into the holes.
Use the flat washer and self-tapping screws to fasten the mounting bracket to the wall or
ceiling. If the device is installed against the wall, ensure that UP arrowhead faces
upwards.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 AP Installation
14
Advertisement
Table of Contents
