Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Human Touch HT-5270
Summary of Contents for Human Touch HT-5270
- Page 2 ©2008 Human Touch, LLC. All rights reserved. July 25, 2008 Please forward any questions or comments regarding this Troubleshooting Guide to documentation@humantouch.com.
-
Page 3: Getting Started
HT-5270 Troubleshooting This Troubleshooting Guide walks you step-by-step through the diagnosis of HT-5270 customer issues. It is important to follow these steps carefully, to ensure that the problem is diagnosed correctly, and therefore the appropriate repair action is taken. Getting Started 1. - Page 4 Make sure you are pressing and holding the recline/incline button for at least five seconds; it can take several seconds to My chair won’t activate the actuator. recline/incline "Recline/Incline" on page 4 for further diagnosis. HT-5270 Troubleshooting Guide...
- Page 5 1. Press the foot and calf massage button on the remote control, then wait 30 seconds. 2. If the foot and calf massager begins massaging but will not deploy or retract, the foot and calf massager actuator is not working properly. This actuator is not replaceable. Replace the chair. HT-5270 Troubleshooting Guide...
- Page 6 Remote beeps once when Recline/Incline buttons are pushed If you hear a single beep when you push the Recline and Incline buttons, it means the backrest actuator is receiving power. Therefore the actuator itself is not working properly. Replace the backrest actuator. HT-5270 Troubleshooting Guide...
- Page 7 1. Make sure that nothing is pressing on the safety sensor. 2. Tap the safety sensor with your foot to ensure that it didn’t get stuck during shipping. 3. If the problem still exists, replace the safety sensor. HT-5270 Troubleshooting Guide...
- Page 8 Human Touch, LLC 3030 Walnut Ave. Long Beach, CA 90807 humantouch.com...
Need help?
Do you have a question about the HT-5270 and is the answer not in the manual?
Questions and answers