Download Print this page

Storage - Electrolux 177817 Operator's Manual

Poulan wheeled weedtrimmer operator's manual

Advertisement

11. Assemble new belt, idler pulleys and
bottom belt keeper to idler bracket.
Tighten pulley bolts securely.
NOTE: Be sure belt is inside top belt
keeper on idler assembly.
12. Position belt and idler assembly in
trimmer, reconnect idler spring and as-
semble idler to chassis.
Chassis
Control cable
Belt
Idler assembly
ENGINE SPEED
Your engine speed has been factory
set. Do not attempt to increase engine
speed or it may result in personal injury.
If you believe that the engine is running
too fast or too slow, take your unit to a
qualifi ed service center for repair and/or
ad just ment.
CARBURETOR
Your carburetor has a nonadjustable
fi xed main jet for mixture control. If your
engine does not operate properly due to
sus pect ed carburetor problems, take your
Immediately prepare your trimmer for stor-
age at the end of the season or if the unit
will not be used for 30 days or more.
TRIMMER
When trimmer is to be stored for a period
of time, clean it thor oughly, remove all dirt,
grease, leaves, etc. Store in a clean, dry
area.
Engine pulley
Top belt keeper
Bolt
13. Install belt around trimmer head pulley
and engine pulley.
14. Replace debris shield and tighten the
four (4) screws securely.
15. Replace chassis cover and tighten
screw securely.
Nut
Spacer
V-idler
Idler
spring
unit to a qualifi ed service center for repair
and/or adjustment.
IMPORTANT: Never tamper with the
engine governor, which is factory set for
proper engine speed. Over speed ing
the engine above the factory high speed
setting can be dangerous. If you think
the engine-governed high speed needs
adjusting, take your unit to a qualifi ed
service center, which has proper
equip ment and experience to make any
nec es sary adjustments.

STORAGE

1. Clean entire trimmer (See "CLEAN-
ING" in the Maintenance section of this
manual).
2. Lubricate as shown in the Main te nance
section of this manual.
3. Be sure that all nuts, bolts, screws, and
pins are securely fas tened. Inspect
moving parts for damage, breakage
and wear. Replace if necessary.
15
Idler bracket
Spacer
Trimmer head pulley
Flat idler
Bot tom
belt
keep er
Flat idler

Advertisement

loading