Advertisement
Operation
The Line-Master can be controlled either manually or using the WINDOWS software
ADM-REMOTE. The parameters that can be individual changed are visible in the display
of the amplifier and on the screen.
Manual Operation
The manual operation of the Line-Master occurs via a rotary knob with an additional
short-hub, push button function. The two-line display shows the parameter name and
its adjustable value.
After switching on, the text "KSdigital – Line-Master" appears.
By turning the knob to the left or right, the available parameters are displayed in turn.
By pressing the knob, the new value is selected and is immediately changed but only
saved as soon as the knob is released. If no further parameters are chosen, after
several seconds the display will return to its original text.
Remote Control
For comfortable operation, the PC Software ADMControl was developed. Via the serial
interface in your network or optionally, with a TCP/IP address, you can send data to
the controller or receive from there.
All adjustments that the loudspeaker permits, can be made remotely on the PC so
that with your laptop, a simple calibration of the speakers directly from your listening
position is possible.
A third possibility utilizes ADM-REMOTE, an optional hardware controller that puts the
display and control knob that are on the rear side of the speaker conveniently at your
disposal in a wire-connected remote control.
10
Advertisement
