Strobe Mode; Figure 5.7 Lighting Control Connection - Advantech VPS-3100 User Manual

Figure 5.7 Lighting control connection

5.4.2

Strobe Mode

Before setting the controller to strobe mode, you first need to set the luminescence
time and delay time. Then, you can trigger the output via an external isolated digital
input or an internal software trigger. The LED will be illuminated according to the time
interval settings, as shown below:
Figure 5.8 Strobe mode
The VPS-3100 uses a one-shot output counter for the delay time setting. A coding
example is given below:
57 VPS-3100 User Manual