ADCP-75-237 • Issue 1 • 8/2007 • Section 2: Installation
1.2
Installation of Repeater Cables
There are four connection points on the repeater; two antenna connectors, one power connector,
and one USB port.
A USB cable is required when configuring the repeater using the GUI. Plug one end of the USB
cable into the port on the bottom of the repeater and plug the other end into a USB port
connected to the PC.
Power Connection
Donor Antenna
Indoor Antenna
1. Connect the ground cable under the grounding screw on the PDU front panel. Connect the
other end of the cable to the site grounding pole.
Page 2-2
© 2007, ADC Telecommunications, Inc.
Figure 2. Example of PDU Standard Wall Mount