Celsus Sound Companion One Manual page 10

streaming to Companion One. Pressing the
Connect Mode button for two seconds will
toggle between the AP and Client modes. In
the Client
configured to connect to the home WiFi
network, so that other streaming-source
devices within the home network do not have
to connect to Companion One's WiFi SSID.
To configure the Client mode
enters the AP mode and visits the setup URL (it
is http://192.168.10.1 by default: see the
Client Connect Mode setup). After the Client
Connect Mode setup has been completed,
Companion One will be in the Client Connect
Mode. If Companion One is out of range or
gets disconnected from the home network, it
will default to AP Connect Mode and will
store the Client Connect Mode setup in its
memory. In WiFi Audio Mode, it will try to
establish a connection to the Client network. If
unsuccessful, it will default to AP Connect
Mode.
b. FS/HS – When USB Audio Mode is first
turned on, it defaults to HS Mode in USB 2.0
High Speed (480Mbps). Pressing the Connect
Mode button for two seconds toggles
between FS and HS modes. FS mode is
USB2.0 Full Speed (12Mbps).
www.celsus-sound.com
mode, Companion
& www.celsussound.com
Celsus Sound
One
, the user first
is
11