Advertisement
Here is the explanation of each function.
[No.1] Battery Save Function ON/OFF
1. [BS-ON] appears on the LCD.
2. Rotate the dial, and the display toggles as shown below. Then ON and OFF are
switched repeatedly.
..downward
upward.....
......BS-ON → BS-OF ..........
........................................
[No.2] Scan Type Selection
1. [TIMER] appears on the LCD.
2. Rotate the dial, and the display toggles as shown below. The scan types are
switched repeatedly.
.downward
upward.....
.....TIMER .....BUSY .....
................................
[No.3] Beep Tone ON/OFF
1. [BEP-ON] appears on the LCD.
2. Rotate the dial to set to [BEP-OF].
3. Each time the dial is rotated, ON and OFF are switched repeatedly.
[No.4] Tone Burst Frequency Setting
1. [1750] appears on the LCD.
2. Rotate the dial, and the display toggles as shown below. Then the tone burst
frequency will be changed.
...... Downward
......... 1750....... 2100...... 1000..... 1450......
.........................................................
[No.5] Clock Shift Setting
1. [SFT-OF] appears on the LCD.
2. Rotate the dial, and the display toggles as shown below. Then the setting of the
CLOCK will be changed.
..... Downward...... Upward.......
.........SFT-OF... SFT-ON...........
...........................................
[No.6] Busy Channel Lock Out Setting
1. [BCL-OF] appears on the LCD.
2. Rotate the dial, and the display toggles as shown below. Then the setting of the
BCLO will be changed.
...... Downward......Upward ..........
..........BCL-OF......BCL-ON..........
................................................
[No.7] TOT Penalty Time
1. [TP-OFF] appears on the LCD.
2. Rotate the dial, and the display toggles as shown below. The setting of TOT
penalty will be changed.
3. ** shows the current TOT penalty time.
The initial setting is 0 second. [TP-OFF] appears on the LCD.
4. Rotate the dial to change the TOT penalty time.
Upward......
Advertisement
