Page 2
TRAINING SERVICES As a supplement to this guide, you can continue learning about our software solutions via the Lifedomus and Tydom 3.0 training courses. For more information about these products please visit our Website using the following links: https:/ /www.deltadore.fr/pro/formations/integration-domotique-lifedomus https:/ /www.deltadore.fr/pro/formations/multimedia-domotique-tydom-3...
Page 3
Installation of Config Studio & Design Studio Configuration of the installation on Config Studio (chapter B) Configuration of the graphical aspect on Design Studio (chapter C) Saving the Project settings and downloading the back-up GUIDE DE CONFIGURATION TYDOM 3.0 P. 3...
❽ Creation and planning of a scenario C. INSTALLATION GRAPHIC: DESIGN STUDIO ❶ Discovery: Interface automatic generation ❷ Customization A) Smart Vision B) Images importation C) Re-positionable widget D) Painter widget and example with a On/Off light CONFIGURATION GUIDE TYDOM 3.0...
During your first connection to a new server module you need only enter the default administrator Password: 1234. Several configuration menus are displayed, throughout this document parts are presented in detail. Points not discussed in this guide are presented during our training courses. GUIDE DE CONFIGURATION TYDOM 3.0 P. 5...
❹ SYSTEM PARAMETERS In this tab, in the left-hand menu, you can change the name of the Lifedomus or Tydom 3.0 server. This name will be displayed in the search for your server in the Finder, Config Studio and Design Studio applications.
Download a copy of the backup onto your PC or Mac • Restore the backup onto the Lifedomus server ❻ UPDATE The “Update” tab in the left-hand menu allows you to download and install the latest available update for your Lifedomus server GUIDE DE CONFIGURATION TYDOM 3.0 P. 7...
Page 8
The server update also comprises the update of Config Studio and Design Studio applications for PC and Mac during the opening of these applications following the upgrade. It is essential to allow the update to be completed, however long is required. CONFIGURATION GUIDE TYDOM 3.0...
Serial number • Public IP address • Available disk space • UUID of your server Do not forget to check the software version and note the serial number before contacting technical support. GUIDE DE CONFIGURATION TYDOM 3.0 P. 9...
Web configuration interface (see previous chapter). This application is available on Windows PC and MAC. This application allows you to define, initially, using connectors, how the Lifedomus or TYDOM 3.0 server will communicate with the products installed. Then, in a second stage, you will create the elements used to control the installation.
Page 11
To Delete a bookmarked server, a press & hold will cause a thrash can to be displayed. EXPLANATION OF ICONS: Display/Hide all the servers to which the PC or the MAC is connected for EASYLIFE access (remote Access). Parameters Full screen GUIDE DE CONFIGURATION TYDOM 3.0 P. 11...
+ button. TIP: these are just models of proposed sites, the names, photos and other parameters are completely customizable at a later stage. After pressing on the “+” button, a thumbnail is displayed: CONFIGURATION GUIDE TYDOM 3.0 P.12...
Page 13
The site parameters are its name, description and image (see chapter C, 2,b ), as well as the input of the electricity tariff that enables in the rest of the application to make an estimation of equipment consumption costs. GUIDE DE CONFIGURATION TYDOM 3.0 P. 13...
On the bottom left is a tick box “Synchronise the Design Studio installations” that allows you to synchronise the operations of: “creation”, “deletion” or “modification of a room, between Config Studio and Design Studio. CONFIGURATION GUIDE TYDOM 3.0 P.14...
❹ CREATION OF THE X3D CONNECTOR In the connector section, open the “Delta Dore X3D” protocol tab. There are 2 X3D connectors available, a USB connector (USB key provided with the server) or an IP connector that corresponds to a Tydom 1.0 gateway. In both cases the configuration and functionalities will be identical.
Page 16
MAC address, the IP address and finally your Password. Click on Save, the connector will start automatically. If you need to use several Tydom 1.0 gateways, then you must create as many connectors as there are gateways. CONFIGURATION GUIDE TYDOM 3.0 P.16...
Page 17
This concerns the roles of lighting, rolling shutters, heating and other automation systems. : You can create up to 12 networks per gateway. To create a network, click on the “+” associated with a Role. GUIDE DE CONFIGURATION TYDOM 3.0 P. 17...
Page 18
The specifics of the activity will be displayed (e.g. light-bulb or dimmer). Click on ‘Create equipment’ in order to configure equipment and make it controllable using your application. You can now name the 1 module in the list or make it blink to identify it physically by clicking on the “magnifying glass” icon. CONFIGURATION GUIDE TYDOM 3.0 P.18...
Page 19
This can then be customized according to your interface requirements. You can then associate it with a room. Click “Validate” and you will be automatically sent to the modules discovery page. GUIDE DE CONFIGURATION TYDOM 3.0 P. 19...
Page 20
If the thumbnail is red, this means that the communication is not functionning correctly with the product. If you want to add an additional product to this network, below you have the possibility of relaunching a discovery process on the network. CONFIGURATION GUIDE TYDOM 3.0 P.20...
Page 21
Tyxal alarm: the download of the node from the central alarm will take place during the association. Tyxal+ alarm: the download of the node from the central alarm takes palce following the association with the central in mode OFF. GUIDE DE CONFIGURATION TYDOM 3.0 P. 21...
To communicate with a KNX bus, you need a KNX/IP gateway connected to the bus and to the local network. Mult-connection gateways are preferred. You will then declare the KNX connector in the Delta Dore server module, using the available connectors menu. To identify a KNX/IP gateway, its IP address, communication port and MAC address are required. The MAC address will be used to automatically find the gateway on the network if a new IP address is given to it in the case of a rebooting of the network.
Page 23
If you need to use several KNX/IP0 gateways, to control for example several separate lines then you must create as many connectors as there are gateways. The creation of KNX equipment is done in the “Equipment” part, on the site page that we will discuss in the next section. GUIDE DE CONFIGURATION TYDOM 3.0 P. 23...
The main room in which you want to display the equipment in the control interfaces. • The connector that you select from the list of connectors, that you created earlier, and that is compatible with the equipment. The connector can no longer be modified after being selected. CONFIGURATION GUIDE TYDOM 3.0 P.24...
B) KNX LIGHT ON/OFF Add a new light using the “+” button on the corresponding line, in the category “lights and plugs”. On the created thumbnail, use the “pencil” button to access the parameters page. GUIDE DE CONFIGURATION TYDOM 3.0 P. 25...
(“W” >> Write) and in the write column, the address of the group associated with the object that reverses the status (“T” >> Read). C) KNX ROLLING SHUTTERS Add a new rolling shutter using the “+” button on the corresponding line, in the category “motorisation”. CONFIGURATION GUIDE TYDOM 3.0 P.26...
Page 27
This group address is linked to an object for which the data is on four bits. To display the property “Position state” scroll the down the list using the mouse wheel. GUIDE DE CONFIGURATION TYDOM 3.0 P. 27...
“Design Studio” application. You will therefore add a user and activate the “Edition mode” right in the “Rights on the Design Studio menu” list. (Note that the scroll bar is not visible) CONFIGURATION GUIDE TYDOM 3.0 P.28...
Page 29
On this page, you will be able to define the language displayed by default when the user is connected. You can also deactivate it to prevent him from connecting from the interfaces or activate it again if necessary. GUIDE DE CONFIGURATION TYDOM 3.0 P. 29...
A) THE SCENARIO The Lifedomus and Tydom 3.0 servers allow the creation of scenarios, that is a chain of actions that can be separated by a delay. To create one, click on the “+” button in the “automation” tab. A thumbnail is then created on the right.
Page 31
When you click on one, a window appears with the list of actions possible on this object. On the right, you can specify a “delay” duration at the end of which this action must execute with respect to the start of the action. GUIDE DE CONFIGURATION TYDOM 3.0 P. 31...
Page 32
To do this you click on a case with your mouse pointer to display the day, then click again on the line of the day displayed. A formula to programme the execution of a scenario is displayed above the page. CONFIGURATION GUIDE TYDOM 3.0 P.32...
Page 33
You can also display the content of the list by using the mouse pointer and maintaining the click. GUIDE DE CONFIGURATION TYDOM 3.0 P. 33...
Page 34
An exception is a date or a period during which the the programming is not in operation. So you can create exceptions for the planning on the calendar, but also independently on the weekly programming. CONFIGURATION GUIDE TYDOM 3.0 P.34...
❶ DISCOVERY: AUTOMATIC GENERATION When you connect for the first time to your Lifedomus or your Tydom 3.0 server with this application, a Project graphic will be generated automatically for the user that you have selected. This installation graphic will be constructed using the configuration created in “Config Studio”.
Page 36
Do not forget to activate the edit mode for the selected user (see “Config Studio“). In edit mode 2 new icons are displayed: Widgets on the page Add widgets To leave edit mode click on the back arrow: CONFIGURATION GUIDE TYDOM 3.0 P.36...
All closed, or position alarm if present in your undefi ned. undefi ned. project. One click closes all shutters. One click closes all shutters. Click on the image to navigate to the corresponding page. GUIDE DE CONFIGURATION TYDOM 3.0 P. 37...
Page 38
A click and hold gives you a stop. The status, as for the site, is represented direct access to the sound system’s remote by all open, all closed or undefi ned position. control. CONFIGURATION GUIDE TYDOM 3.0 P.38...
Page 39
To create a Smart Vision page: In edit mode, you will see displayed to supplementary thumbnails in the navigation banner: “Add a page” and “Add a Smart Vision page” GUIDE DE CONFIGURATION TYDOM 3.0 P. 39...
The image manager is accessible from the majority of object displaying a photo or image in edit mode, and sometimes from the parameters button. CONFIGURATION GUIDE TYDOM 3.0 P.40...
Page 41
A formula is displayed above the page and allows you to access different files of your computer or a connected USB storage key and display available images and photos. Then select the photo or photos you need and validate using the button below on the right. GUIDE DE CONFIGURATION TYDOM 3.0 P. 41...
The display can be constant or conditioned by the status of your items of equipment and it is configured in the part called “What I See”. The execution of commands is realised according to an action carried out over the zone and it is configured in the part called “What I Do”. GUIDE DE CONFIGURATION TYDOM 3.0 P. 43...
Page 44
Add a widget on the page by selecting it in the banner at the bottom of the screen. Go into Components then select “Painter”. Then, after having selected your widget, click on the Eye to display the configuration page of “What I See”. Click on “Add an image”. CONFIGURATION GUIDE TYDOM 3.0 P.44...
Page 45
A line is added on the left with the selected image. Select this line and in the part that displays in the centre, click on “Condition”. Click on the pencil that is displayed and select the return status of a light-bulb. GUIDE DE CONFIGURATION TYDOM 3.0 P. 45...
Page 46
When you validate, the line appears in the condition and the associated value is “TRUE”. Repeat the operation, adding an image representing a light-bulb switched-off. CONFIGURATION GUIDE TYDOM 3.0 P.46...
Page 47
You will validate this page to exit the mode “What I see” and we will now deal with the command of the light. To do this, you will click on the arrow associated with your widget that you selected previously by clicking on it. GUIDE DE CONFIGURATION TYDOM 3.0 P. 47...
Page 48
Find your equipment, the light-bulb selected to display the return status in the “What I see” widget so that you can select the action “Switch the light-bulb”. Add the action that you will see displayed in the “Press” part. CONFIGURATION GUIDE TYDOM 3.0 P.48...
Page 49
You can now exit this page and quit the edit mode by clicking on the return button in the menu. You now have a widget on your page that enables you to control your light. GUIDE DE CONFIGURATION TYDOM 3.0 P. 49...
Page 50
CONFIGURATION GUIDE. We hope that the content will help you with the installation of your Lifedomus and Tydom 3.0 multi-protocol home automation servers. As we mentioned in the introduction, this document provides you with the basics necessary for the configuration of our applications, but you can also progress even further! Don’t hesitate to contact us if you would like to take part in...
Page 52
Find the full range of our home automation solutions at www.deltadore.co.uk INFORMATION TECHNICAL SUPPORT Delta Dore Group S.A. - Le vieux chêne 35270 Bonnemain 020 7660 2919 www.deltadore.co.uk/contact...