Configuring The Access Point; Connecting To The Ap - CNET CNAP-711 User Manual

3.3 Configuring the Access Point

3.3.1

Connecting to the AP

Click Start/Program/SNMP.
Note: The default IP address of the AP is "192.168.0.254". For connecting to the AP, please
assign an IP address (in the range of 192.168.0.1 ~ 192.168.0.253) to the network device used
for configuration (Wireless or wired LAN card).
The setup program will scan the network for the Access Points installed:
When done, the present settings information of all the Access Points on the network will be
displayed on the screen as below:
9