Table of Contents
Advertisement
Appendix:
•Reset the AP by manual:
If User forget User password or User WLAN Access Point has locked up, User can reset it to
factory defaults by performing the following steps:
1.
Power off the WLAN Access Point.
2.
Push in the reset button located on the back of the WLAN Access Point.
3.
While holding in the button, apply power to the AP.
4.
The Access Point will start to load the default settings.
5.
Wait for about 5 s
with the factory default settings.
econds. Release the Push Button, Then the Access Point will restart
23
Advertisement
Table of Contents
