D3010E Quick Installation Guide v1.00 Package Contents Ceiling Mount Installation Pack D3010E Screws & Anchors Alignment Sticker Product CD VIP Card (Optional) Quick Installation Guide Ingrasys Technology Inc.
Page 3
D3010E Quick Installation Guide v1.00 Physical Description & Connection Connections Product Front View Simply connect the camera to network device supported PoE (Power over Ethernet) function via Ethernet cable Lens Product Side View Slide lock Cable side cover Ingrasys Technology Inc.
D3010E Quick Installation Guide v1.00 Mounting the Camera 1. Place the alignment sticker on the ceiling which was preferred and drill three holes into the ceiling for cable and screws 2. Connect and route Ethernet cable through the ceiling (Note: remove the cable side cover once the cable route from the side) 3.
Page 5
D3010E Quick Installation Guide v1.00 Tuning the Camera 1. Push the slide lock rightward to remove the dome cover 2. Adjust tilt angle by turning tilt adjustment screws and lens focus afterward 3. Place the dome cover into camera module and ensured it locked Tilt adjustment screw Ingrasys Technology Inc.
D3010E Quick Installation Guide v1.00 Assigning IP address Launch Ingrasys Discovery Tool (IngrasysDiscovery.exe). The tool will start searching and then displaying the cameras on the Device List after they are found. Check the checkbox to select a camera device from the list.
D3010E Quick Installation Guide v1.00 Accessing the camera Launch IE browser and input the IP address of the camera, or click on “Browse” button on Discovery Tool. The web page with video will then be shown as below. The live video of the camera can be played with a RTSP player, such as VLC or QuickTime. The network URL is rtsp://Camera IP/stream1.
Need help?
Do you have a question about the D3010E and is the answer not in the manual?
Questions and answers