Advertisement
Opening Safe For The First Time
Opening Your Safe for the First Time Using
the Pre-set Factory Code
Batteries have been pre-installed at the factory. Using the
factory pre-set Passcode
1.
Enter the three digit Factory Passcode
followed by the
LED will light and the lock will click.
2.
Rotate the small handle on the knob clockwise to the
right, and then pull the door open.
Important:
If no action is taken, the safe will automatically relock in 5 seconds and the
Passcode will need to be re-entered.
3.
A fast blinking amber light indicates that the Passcode was
entered incorrectly. Re-enter the correct Passcode and
try again.
Security Lockout:
The safe is designed to lock out the
entered multiple times.
•
After the 3rd error:
•
4-6 errors:
•
7+ errors:
If you have forgotten the Passcode, entry can be made using the Emergency
Override Key. (See page 4).
Closing Your Safe
1.
Make sure nothing inside the safe is obstructing the door from completely
closing.
2.
Rotate the knob counterclockwise to the left and the safe will lock.
2
159#
, open the safe as follows:
#
Symbol. If entered correctly, the green
keypad function if the wrong Passcode is
20 second lock-out. (waiting period)
5 minute lock-out.
1 hour lock-out.
159
on the keypad
Amber
Green
Light
Light
# Symbol
Rotate
right
to open
Hide quick links:
Advertisement
