Garmin G1000 Pilot's Manual page 80

WAYPOINT PAGE GROUP
ARRIVAL INFORMATION PAGE (STAR)
The Arrival Information Page shows the available
Standard Terminal Arrival (STAR) procedures for the
selected airport. Where multiple transitions or runways
are associated with the arrival procedure, that information
may also be displayed. A map image provides a layout
diagram for each arrival, transition and runway. To
display the Airport Arrival Information Page press the
STAR softkey.
To scroll through the available arrivals:
1. Press the FMS knob to activate the cursor.
Turn the large FMS knob to place the cursor on
2.
the 'ARRIVAL' procedure name field.
3. Turn the small FMS knob to display a window
of available arrivals for the selected airport.
Continue turning the small or large FMS knob
to select the desired arrival.
4. Press the ENT key. The cursor moves to the
'TRANSITION' field.
Turn the small FMS knob to display a window
5.
of available transitions. Continue turning the
small or large FMS knob to select the desired
transition.
Press the ENT key. The cursor moves to the
6.
runway field.
7. Turn the small FMS knob to display a window of
available runways. Continue turning the small
or large knob to select the desired runway.
8. Press the ENT key. To remove the flashing
cursor, press the FMS knob.
8-78 Garmin G1000 MFD Pilot's Guide for the DA40
NOTE: 'ALL' may appear in the runway field,
indicating the arrival procedure applies to all
runways. For airports with parallel runways, 'B'
may appear at the end of the runway designation
to indicate the arrival procedure applies to both
runways.
Figure 8.8.7 Arrival Page Menu
190-00381-03 Rev. A