Page 1
ARQ™ UNIVERSAL REMOTE CONTROL MODELS TM100 AND TM110 Activate up to three products, such as a garage door opener, ® light controls, or gate operator with your ARQ™ Universal Remote Control. Each button must be programmed separately. Read instructions thoroughly BEFORE beginning.
Page 2
Download the ARQ™ app from the ® App Store or Google Play™ store and follow the instructions in the app. ONLINE INSTRUCTIONS AND HOW-TO-VIDEOS Go to www.arq.chamberlain.com for additional instructions and How-to-Videos. Instructions are provided online for the following: ® ® ® •...
BEFORE YOU BEGIN Locate the Program/LEARN button on your garage door opener (typically located on the back or side panel). Program/LEARN Button Your product may look different. Ladder may be needed. IMPORTANT: The remote control will activate your door during programming.
Page 4
PROGRAMMING Open garage door. (In car): Press and hold the outer buttons on the remote control until the green LED stays solid (3-5 seconds). (In garage): Press and release the Program/LEARN button on the garage door opener. (In car): Press and release the button twice that you would like to program.
Page 5
TEST Test the remote control by pressing the button you programmed in step 4. If the door does not move, repeat the programming steps or go to www.arq.chamberlain.com for additional instructions. BATTERY To prevent possible SERIOUS INJURY or DEATH: • DO NOT use a visibly damaged remote control battery.
WARRANTY ONE YEAR LIMITED WARRANTY The Chamberlain Group, Inc warrants to the first consumer purchaser of this product that it is free from defect in materials and/or workmanship for a period of 1 year from the date of purchase. NOTICE: To comply with FCC and/or Industry Canada (IC) rules, adjustment or modifications of this transceiver are prohibited.
Page 7
TÉLÉCOMMANDE UNIVERSELLE ARQ™ MODÈLES TM100 ET TM110 Activez jusqu’à trois produits, comme un ouvre-porte de garage, ® des commandes d’éclairage MyQ ou un actionneur de barrière avec votre télécommande universelle ARQ™. Chaque bouton doit être programmé séparément. Bien lire les instructions AVANT de commencer.
Page 8
ARQ™ de l’App Store ou de Google Play™ et suivre les instructions dans l’application. INSTRUCTIONS ET VIDÉOS PRATIQUES EN LIGNE Aller à www.arq.chamberlain.com pour des instructions et des vidéos pratiques supplémentaires. Des instructions sont fournies en ligne pour les dispositifs suivants : ®...
AVANT DE COMMENCER Trouver le bouton de programmation/d’apprentissage sur votre ouvre-porte de garage (situé en général sur le panneau arrière ou latéral). Bouton de programmation/ d’apprentissage Votre produit peut avoir une autre apparence. Il peut être nécessaire d’utiliser une échelle. IMPORTANT : La télécommande activera votre porte pendant sa programmation.
Page 10
PROGRAMMATION Ouvrir la porte de garage. (Dans l’auto) : Enfoncer et tenir les boutons extérieurs sur la télécommande jusqu’à ce que la DEL verte s’allume en continu (3 à 5 secondes). (Dans le garage) : Enfoncer et relâcher le bouton de programmation/ d’apprentissage sur l’ouvre-porte de garage.
Page 11
ESSAI Tester la télécommande en appuyant sur le bouton programmé à l’étape 4. Si la porte ne commence pas à bouger, répéter les étapes de programmation ou aller à www.arq.chamberlain.com pour des instructions supplémentaires. PILE Pour éviter des BLESSURES GRAVES, VOIRE MORTELLES : •...
GARANTIE GARANTIE LIMITÉE D’UN AN La société Chamberlain Group, Inc. garantit à l’acheteur initial que le produit est exempt de tout défaut de matériaux ou de fabrication pendant une période d’un an à compter de la date d’achat. AVIS: Les règles de la FCC et/ou d’Industrie Canada (IC) interdisent tout ajustement ou toute modification de ce récepteur.
Need help?
Do you have a question about the ARQ TM100 and is the answer not in the manual?
Questions and answers