Related Manuals for iBeam TE-WTR
Summary of Contents for iBeam TE-WTR
- Page 1 TE-WTR User Manual iBeamUSA.com MetraDealer.com techsupport@metra-autosound.com � TECH SUPPORT 800-253-8324...
- Page 2 Components...
- Page 3 Functions 1) After connecting the main power, the blue color POWER LED will be activated at both RX and TX. Immediately after connecting the main power, the green color LINK LED will be activated at both RX and TX. When RX-TX's blue color POWER LED and green color LINK LED are activated at the same time then the RX and TX are connected (linked) each other and working normally.
-
Page 4: Installation
4) ) In case another RX or TX needs to be connected (for example, during exchange of trucks and trailers each other), then please repeat above steps 1~3. Antenna Power LED Transmitter (TX) Power Link Link The TX should be installed on top of the roof from the cargo space or under the... -
Page 5: Wiring Diagram
Wiring Diagram ﹢ VIDEO AUDIO Monitor Receiver (RX) Camera Red 11-32V DC Black GND Transmitter (TX) -
Page 6: Cleaning And Maintenance
Cleaning & maintenance 1.Make sure the power to the TE-WTR system is disconnected. Gently remove any foreign material on the housing by rubbing the surface lightly with a wet, soft cloth. 2.During cleaning, please make sure there is no water ingress between the antenna terminal and the antenna. -
Page 7: Specifications
Specifications Operating frequency 2400MHZ-2483MHZ Modulation system Max. range 150-200M (in free space) General Operating temperature -30℃-80℃ Operating current 0.13-0.17A IP Rating IP69K Power supply 11-32V Video input CVBS 1.0VP-P,75Ω Transmitter Audio input AUDIO MAX 2VP-P,50Ω (TX) TPU cable length Approx. 400cm Dimensions 131 x 100 x 25.6mm Weight... - Page 8 IMPORTANT If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated.