PART V. Changing Jobs
7. Backup-pin rearrangement
- Arrange the backup pins after moving the backup
table up.
- If the double-faced board is on work, placing
Caution
the backup pins wrongly could lead to improper
placement or damage the placed components.
Be sure to adjust the backup pins position correctly.
For detailed information about backup pin arrangement, please
refer to p. 57, 'Arranging Backup Pins' in 'Additional Check
Points', <PART VI>.
8. Install the feeder
① Fixing the feeder in the slot
Install the feeders in the feeder base by referring to the above feeder
installation method
9. Production
Perform the new production
SM421 Operation Handbook
② Fixing the grip
48