Logitech logi POP HOME Setup Manual

POP HOME SWITCH
Starter Kit Setup Guide
THINGS YOU'LL NEED
TO BEGIN
Wi-Fi internet connection
iOS or Android phone:
®
– iPhone 5 or later and iPod 5th Gen
®
or later with iOS 9 or higher
– Android phone with Bluetooth
Smart
SETTING UP YOUR POP
HOME SWITCH
Download the Logi Pop app from
the App Store or Google Play.
Plug in the bridge in the center of
your home.
Launch the app for a guided setup.
by Logitech
EASY INSTALL —
NO TOOLS OR WIRES
Mount your Pop Home Switch
anywhere in your home. Just stick
the double-sided mounting tape on a
clean, smooth surface and then place
your Pop Home Switch on the tape,
hold it in place for 20 seconds, and
®
you're done. It's easy to move your Pop
Home Switch — just twist to pull the
switch off the wall.
To clean your Pop Home Switch, use
a damp cloth with soap and water or
rubbing alcohol.
CUSTOM RECIPES THREE GESTURES
TO CONTROL YOUR
SMART DEVICES
Single click
Switch the lights in a room on/off to a
Here are some recipe
preset brightness and color.
examples to make your Pop
Home Switch easy and useful
for the entire family:
Double click
Start a scene with lights dimmed to a
warm color, blinds half way down, and
Sonos playing your favorite songs.
Long press
Create a recipe for specific areas of
your home such as 'back of house.'
Turn on/off outdoor lights, shut the
blinds, and activate door locks.
For more information go to logi.com/support/pop. ©2016 Logitech. All rights reserved. Logitech, Logi and other Logitech
marks are owned by Logitech and may be registered. The Bluetooth word mark and logos are registered trademarks
®
owned by Bluetooth SIG, Inc. and any use of such marks by Logitech is under license. All other trademarks are the
property of their respective owners.