MikroTik Woobm-USB Manual
  1. Manuals
  2. Brands
  3. MikroTik Manuals
  4. Storage
  5. Woobm-USB
  6. Manual
MikroTik Woobm-USB Manual

MikroTik Woobm-USB Manual

Usb device meant to ease wireless access to routerboard devices that have a usb port, but do not have wireless interfaces
Hide thumbs Also See for Woobm-USB:
1
2
3
4
Table of Contents

Advertisement

Quick Links

Download this manual
Woobm-USB
The Woobm is a USB device meant to ease wireless access to RouterBOARD devices that have a USB port, but
do not have wireless interfaces. The device can operate in 2GHz 802.11b/g/n wireless mode, both as a slave and
as a MASTER point, which can be protected with a WPA wireless password.

Powering

The device accepts powering from the USB port of the RouterBOARD device.

Setup

1. Plug the Woobm into the USB port of a RouterBOARD device.
2. Set your computer IP configuration to automatic (DHCP).
3. From your PC or smartphone, connect to the wireless network name "WoobmAP".
4. Once connected to the wireless network, open http://192.168.4.1 in your web browser, since there is no
password by default, you will be logged in automatically.

Configuration

The Woobm runs a special operating system where you can configure it's basic functionality, the configuration is
accessible through a web interface. To connect to the RouterBOARD device, the following methods are available:
1. Click on "Terminal" in the Woobm web configuration interface.
2. Open a Telnet connection to the Woobm device from your computer, you will be directly connected to the
RouterBOARD device.
For more detailed instructions, please see full Woobm software documentation on

Buttons and jumpers

The Woobm has one button, which has the following functions:
Reset: remove the device from the USB port, press the button, plug in the device, while holding the button.
Release the button when the LED light starts flashing red to restore factory defaults.
WPS: press the button once, while it is working. This will enable WPS for 5 seconds.

Operating system support

The device supports Woobm software only. It can be updated, by uploading a newer .BIN file through the web
configuration page.
See
www.routerboard.com
for more information. Contact
support@mikrotik.com
http://mt.lv/help
20-Jul-17

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Woobm-USB and is the answer not in the manual?

Questions and answers

Related Manuals for MikroTik Woobm-USB

Summary of Contents for MikroTik Woobm-USB

  • Page 1: Operating System Support

    Woobm-USB The Woobm is a USB device meant to ease wireless access to RouterBOARD devices that have a USB port, but do not have wireless interfaces. The device can operate in 2GHz 802.11b/g/n wireless mode, both as a slave and as a MASTER point, which can be protected with a WPA wireless password.

  • Page 2: Industry Canada

    L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. www.routerboard.com for more information. Contact support@mikrotik.com 20-Jul-17...

  • Page 3: Ce Declaration Of Conformity

    CE Declaration of Conformity Full Declaration of Conformity (DoC) may be obtained by visiting our product page on https://mikrotik.com [EN] English Hereby, MIKROTĪKLS SIA declares that this RouterBOARD is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EC.
  • Page 4 RF Exposure Information: The EUT is compliance with SAR for general population/uncontrolled exposure limits in IC RSS-102 and had been tested in accordance with the measurement methods and procedures specified in IEEE 1528. This equipment should be installed and operated with minimum distance 5 mm between the radiator and your body.

This manual is also suitable for:

4752224006868

Table of Contents