Operation - DA DA1280 Manual

Operation

Incoming Call
LED3 is flashing and connected terminal will be signalising incoming
call. Accept Call with terminal and LED3 stops flashing and shows LED3
active.
Outgoing Call (overlay dialing)
Hook-off analogue terminal. LED3 shows active and dialing tone will be
announced. Analogue terminal dials calling number. After 4 seconds
wait, DA1280 will setup the call with this resulting number sequence.
DA1280 is in transparent connection (ex-works-setup).
Outgoing Call (auto dialing)
DA1280 can hold a special telephone number for auto-dialing after
hook-off. This telephone number must be configured (see pages 8-10).
-5-