Making The Wireless Link - Panasonic SH-FX85 Operating Instructions Manual

RQTX_FX85_En.fm Page 5 Thursday, December 21, 2006 2:56 PM

Making the wireless link

Refer also to the operating instructions for your home theater unit.
STEP 1:
On the wireless sound system:
3
Press [SELECTOR] repeatedly to select "WIRELESS".
"WIRELESS" indicator lights up.
2
Turn the unit on.
POWER
SELECTOR
WIRELESS LINK OPTION POWER WIRELESS
WIRELESS LINK
indicator
STEP 2:
On the home theater unit:
Turn the unit on and check the wireless link indicator.
e.g. Display on the home theater unit
" [W2] "or an indicator should light up.
O SLP STCT DDTS PL
≥ If " [W2] "or an indicator is flashing,
SRDE. PRG
PGM RND RDS
refer to page 11, Troubleshooting guide.
W1 W2
EQ WS
≥ The WIRELESS LINK indicator on the wireless sound system also lights up when
the wireless link is active.
Conserving power
The wireless sound system consumes a small amount of power, even when it is in off
mode (approx. 0.2 W). To save power when the unit is not to be used for a long time,
unplug it from the household AC outlet.
1
Reduce the volume
to "MIN" position.
WIRELESS CONTROL
VOL
TUNE
MIN MAX
OPTION MUSIC PORT
∫ Pairing with your existing Panasonic wireless
§
accessories of the home theater system
Pairing is needed for using your SH-FX85 together with your existing Panasonic
wireless accessories (not included) on the same home theater system.
Preparation
≥Use the SH-FX85T transmitter card for pairing. Unplug its SB-FX85 wireless
sound system from the AC outlet.
Store your SH-FX65T transmitter card in a cool dry place for later use.
≥Make sure to connect the AC power supply cords of your wireless accessories.
≥Turn on the home theater unit and reduce the volume.
1 Turn on the wireless accessories you want to use together with SH-FX85.
2 While pressing [5/9] on the home theater unit,
press the numbered button [3] on the remote control until "P" lights in the home
theater unit's display.
3 While "P" is displayed, press [I/D SET] on each of your wireless accessories.
e.g.

Use a pointed object.
≥If "P" goes off before you press [I/D SET] of your next wireless accessory,
repeat step 2 and then continue the procedure.
4 While pressing [5/9] on the home theater unit,
press the numbered button [3] on the remote control.
≥The corresponding wireless link indicator (" [W1] ", " [W2] ", or " [WS] ") lights on
the home theater unit.
5 Turn off and on your wireless accessories.
≥Make sure the wireless link indicators on your wireless accessories light up.
[Note[
Repeat the above steps if you should use SH-FX65T transmitter card.
(The link with SH-FX85 will be disconnected.)
 

 
5