Instrument And Control Functions; Main Switch; Dashboard Unit - Analog - KSR Moto B 05 User Manual

INSTRUMENT AND CONTROL FUNCTIONS

MAIN SWITCH

The main switch controls the ignition
and lighting systems, and also used to
lock the steering. The various positions
are described as below.
On
All electrical circuits are supplied with
power, the engine can be started. The
key cannot be removed.
Off
All electrical systems are off . The key
can be removed.
14
Steering lock
The steering is locked, and all electri-
cal systems are off. The key can be
removed.
Lock the steering
1. Turn the handlebar fully to the left.
2. Insert the key into the main switch.
3. Turn the key while you apply pres-
sure to it, counterclockwise in the
position. If the lock does not engage
immediately, move the handlebars
back and forth slightly.
4. Remove the key.
Unlock the steering
1. Insert the key into the main switch.
2. Turn the key clockwise to the
sition. If the lock does not engage
immediately, move the handlebars
back and forth slightly.
! WARNING
Never turn the key to
the vehicle is moving, otherwise the
electrical systems will be switched
off, which may result in loss of con-
trol or an accident. Make sure that
the vehicle is stopped before tur-
ning the key.

DASHBOARD UNIT - ANALOG

1
2
1. Speedometer
po-
2. Odometer
3. Turn signal indicator light
4. Fuel gauge
5. Engine oil level warning light
6. High beam indicator lamp
or , while
3
4
5
6